Custom Shift Plate -PICS-
Administrator
Joined: Mar 2001
Posts: 368,791
Likes: 24,900
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Looks nice. PM sent. 
Melting Slicks
Joined: May 2005
Posts: 2,209
Likes: 12
From: Montgomery Alabama
Cruise-In VII Veteran
St. Jude Donor '06
That does look nice.
It looks like there is plenty of room on the plate for some custom engraving as well.
I wonder if the guy makes a similar plate for the A4 tranny equipped cars?
I would think a thick peice of black plastic drilled to fit snugly around the shifter, that moved with the shifter would look good behind the plate to block the view of the rubber boot.
Maybe a flat piece of armaflex insulation from Lowes or Home Depot (depending on which NASCAR driver you support) would do the trick too. It is spongy, could be slipped over the shifter, and is a great insulator for noise and heat. One side is a matte black finish which sould not take away from the brushed aluminum look of the plate.
It looks like there is plenty of room on the plate for some custom engraving as well.
I wonder if the guy makes a similar plate for the A4 tranny equipped cars?
I would think a thick peice of black plastic drilled to fit snugly around the shifter, that moved with the shifter would look good behind the plate to block the view of the rubber boot.
Maybe a flat piece of armaflex insulation from Lowes or Home Depot (depending on which NASCAR driver you support) would do the trick too. It is spongy, could be slipped over the shifter, and is a great insulator for noise and heat. One side is a matte black finish which sould not take away from the brushed aluminum look of the plate.
Instructor
Joined: Feb 2005
Posts: 182
Likes: 1
From: Terre Haute IN
St. Jude Donor '06-'08
Originally Posted by nite
Great suggestions guys, thanks! In fact, I'm going to get those allen scews today.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette & Porsche 911: How Two Icons Conquered the Last 25 Years
Joe Kucinski
2027 Chevrolet Silverado 1500 First Look: Everything You NEED to Know!
Michael S. Palmer
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
Thread Starter
Racer
Joined: Oct 2005
Posts: 456
Likes: 3
From: Western MA
Originally Posted by tnarg
They're called "button head fastener" and you can get them in stainless at your local hardware store.
And thanks for the compliments guys! If the machinist is reading this, I'm sure he's quite flattered.
might have to look into that
Thread Starter
Racer
Joined: Oct 2005
Posts: 456
Likes: 3
From: Western MA
Originally Posted by IdriveC5
That does look nice.
It looks like there is plenty of room on the plate for some custom engraving as well.
I wonder if the guy makes a similar plate for the A4 tranny equipped cars?
I would think a thick peice of black plastic drilled to fit snugly around the shifter, that moved with the shifter would look good behind the plate to block the view of the rubber boot.
Maybe a flat piece of armaflex insulation from Lowes or Home Depot (depending on which NASCAR driver you support) would do the trick too. It is spongy, could be slipped over the shifter, and is a great insulator for noise and heat. One side is a matte black finish which sould not take away from the brushed aluminum look of the plate.
It looks like there is plenty of room on the plate for some custom engraving as well.
I wonder if the guy makes a similar plate for the A4 tranny equipped cars?
I would think a thick peice of black plastic drilled to fit snugly around the shifter, that moved with the shifter would look good behind the plate to block the view of the rubber boot.
Maybe a flat piece of armaflex insulation from Lowes or Home Depot (depending on which NASCAR driver you support) would do the trick too. It is spongy, could be slipped over the shifter, and is a great insulator for noise and heat. One side is a matte black finish which sould not take away from the brushed aluminum look of the plate.
I'm sure he could make one for an A4, if an A4 owner in his area could meet up with him, so he could create a template. He lives somewhere in CA. I realize that's a big state, but if any CA A4 owners are interested, LMK & I'll throw you his email.
1st Gear
Joined: Apr 2026
Posts: 1
Likes: 0
