More Advice
07-22-2006, 05:09 PM
#1
Racer
Thread Starter
Member Since: Jul 2006
Posts: 461
Likes: 0
Received 0 Likes
on
0 Posts
More Advice
Hello again, guys. Well, went to W. Coast Corvette and ordered a bottle of touchup paint. This may sound stupid, but is there any particular technique in applying this stuff to the finish? Any tips, tricks, suggestions would be greatly appreciated. I would suppose it's a little brush thing like fingernail polish?? Thanks. 
07-22-2006, 08:14 PM
#2
Racer
Member Since: Jun 2006
Location: FL
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
Thin, multiple coats. Don't try to fix it w/the first coat. Layer the coats to just below flush w/the surface of the paint, then follow it up w/clearcoat. You should be able to get some clearcoat touch-up at the same place you got the paint. Good luck! 
07-22-2006, 10:04 PM
#4
Racer
Yes, multiple thin coats are the answer. If the touch up brush seems too big you could try using the non flammable end of a match to just barely apply a thin coat of paint. Then repeat the process until you are satisfied with the results. Good luck.