digital climate control
Burning Brakes
Joined: Aug 2002
Posts: 926
Likes: 2
From: chandler az
Lift up arm rest -
remove plastic covers in the rear of console
remove both nuts
pop out active handling button part by prying up from rear
remove both nuts under it
remove ashtray
remove screw behind ashtray (torx)
remove screw above lighter
carefully pop off the vent cover beside the ignition key(the tabs are on the sides)
remove torx screw behind that cover.
remove the shifter ****
remove the shifter boot
remove the console - slide back while slightly lifting the rear - then you have to manuever it out of the way.
the A/C controller is held on with 2 or 4 torx screws.
I don't think I missed anything other than undoing connectors which you will see as you remove the various components.
remove plastic covers in the rear of console
remove both nuts
pop out active handling button part by prying up from rear
remove both nuts under it
remove ashtray
remove screw behind ashtray (torx)
remove screw above lighter
carefully pop off the vent cover beside the ignition key(the tabs are on the sides)
remove torx screw behind that cover.
remove the shifter ****
remove the shifter boot
remove the console - slide back while slightly lifting the rear - then you have to manuever it out of the way.
the A/C controller is held on with 2 or 4 torx screws.
I don't think I missed anything other than undoing connectors which you will see as you remove the various components.
Le Mans Master
Joined: May 2004
Posts: 7,825
Likes: 0
From: Manassas VA
Hey, 2000Vette, does the unit simply not work, or is the display dim? If it's a dim display, there's a simple trick to fix it, as long as you have familiarity with soldering.
I'm not sure of the thread, but I'm sure somebody will post the link to it... meanwhile, try a search on HVAC Display. You might have some luck there.
Good luck!
I'm not sure of the thread, but I'm sure somebody will post the link to it... meanwhile, try a search on HVAC Display. You might have some luck there.
Good luck!
Burning Brakes
Joined: Jan 2001
Posts: 1,024
Likes: 34
From: Atlanta
Originally Posted by brookman
remove the shifter ****
remove the shifter boot
remove the shifter boot
You don't have to remove the ****. Unfasten the clips at the base of the shifter boot and you can pull the console up over the shifter assembly.
Race Director
Joined: Jul 2004
Posts: 16,795
Likes: 62
From: Lake Havasu City, AZ
this forum member web site has the removal instructions....
http://www.spdkilz.com/techtipledhvac.html
http://www.spdkilz.com/techtipledhvac.html
