C5 Car Trailer
Melting Slicks
Joined: May 2004
Posts: 3,372
Likes: 502
From: Jacksonville Florida
I have a Pace Shadow 24 foot enclosed trailer. My 2004 Z06 is stock ride height and I have no problem loading it into the trailer. The Pace has a beaver tail design and I don't even have to jack up the tongue for loading. My trailer is a 1999 and has the wider rear ramp door option. The tail lights are in the door. The newer models have the taillights in the uprights and you lose about seven inches of width.
Racer
Joined: Dec 2002
Posts: 279
Likes: 0
From: Virginia
I think the nicest and easiest loading open trailer I have come accross for car transport is the Texas Rollback Trailer...very cool...check them out...http://www.texasrollback.net/ 
Uber Waxer
Joined: May 2004
Posts: 8,651
Likes: 5
From: Hanover MD
Cruise-In 8-9-10-11 Veteran
CI 9, 10 & 11 Car Show Winner
St. Jude Donor '08-'10
i have a 24 foot haulmark enclosed and with a few 2x6's at the end of the ramp and the trailer tilted back i can get some very low c5's in my trailer. my car is cut on front bushings and all the way on the rears and i can get in with no scraping. yellohhh's car is lower than mine and we got his in it with no issues as well.
Team Owner
Joined: Sep 2003
Posts: 43,084
Likes: 33
From: Raleigh / Rolesville NC
Originally Posted by Too Slow '90
Anyone know of a car trailer that will load & carry a C5? Everything I see appears to be too high to load. Thanks.
There are also many open trailers too.
Race Director
Joined: May 2003
Posts: 19,105
Likes: 2
From: Paducah KY
Cruise-In VII Veteran
Another option, if your looking for an open trailer, is the roll-back design.
I have the Sloan's Kwik-Load. Very easy load/unload without using ramps.
Here's the link: http://www.kwikload.com/products.htm
I have the Sloan's Kwik-Load. Very easy load/unload without using ramps.
Here's the link: http://www.kwikload.com/products.htm
Last edited by Z06-JIM; Oct 1, 2006 at 08:49 PM.
Uber Waxer
Joined: May 2004
Posts: 8,651
Likes: 5
From: Hanover MD
Cruise-In 8-9-10-11 Veteran
CI 9, 10 & 11 Car Show Winner
St. Jude Donor '08-'10
Originally Posted by Z06-JIM
Another option, if your looking for an open trailer, is the roll-back design.
I have the Sloan's Kwik-Load. Very easy load/unload without using ramps.
Here's the link: http://www.kwikload.com/products.htm
I have the Sloan's Kwik-Load. Very easy load/unload without using ramps.
Here's the link: http://www.kwikload.com/products.htm
damn jim, for a car that pretty, you need an enclosed!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
