[Z06] Vette Essentials Interior and custom sub box...
Thread Starter
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Vette Essentials Interior and custom sub box...
[/QUOTE]Here are the three things that are left. I have dropped the price down as low as possible before putting them oin e-bay. On the V.E. interior, I will need your parts as a core.
1. V.E interior as in pics above. $450 SHIPPED. Does not include the wheel as I dont have a puller. This is $300 lower than I was orginally asking. PERFECT CONDITON.
2. The Subs and box in pictures above. Includes the box, 3 alumapro 10's with corvette logo, cover shown here with all the blue lights, and both rear covers. Its a plug in play. You can wire it right in. All you need is an amp to run them. This is made of lightwieght mdx board and acts as a partition for the zo6. $550 shipped.
3. Borla straight pipe. $125 Shipped.
Racer
Joined: Oct 2005
Posts: 474
Likes: 0
From: Panama City Beach FL
Originally Posted by vettethret
1. V.E interior as in pics above. $450 SHIPPED. Does not include the wheel as I dont have a puller. This is $300 lower than I was orginally asking. PERFECT CONDITON.
2. The Subs and box in pictures above. Includes the box, 3 alumapro 10's with corvette logo, cover shown here with all the blue lights, and both rear covers. Its a plug in play. You can wire it right in. All you need is an amp to run them. This is made of lightwieght mdx board and acts as a partition for the zo6. $550 shipped.
3. Borla straight pipe. $125 Shipped.[/QUOTE]
For some reason I can't get these pics to open on my comp. Any chance you can send me pics of the sub/box to j_burback@yahoo.com
Thanks!
Safety Car
Joined: May 2006
Posts: 3,799
Likes: 1
From: Northern Virginia
St. Jude Donor '08
Very Nice!
I have ordered a lot of vette essential stuff and it is top quality!! Can't go wrong with vette essential stuff.
What model corbeau seats? How do you like them? Were they easy to install?
It appears as if you are trying to sell this stuff. You might want to post in the C5 parts for sale section, if you have not already done so.
I have ordered a lot of vette essential stuff and it is top quality!! Can't go wrong with vette essential stuff.
What model corbeau seats? How do you like them? Were they easy to install?
It appears as if you are trying to sell this stuff. You might want to post in the C5 parts for sale section, if you have not already done so.
Thread Starter
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Originally Posted by PolishDude
hmm got me kinda tempted on that sub box..what are the specs on the subs? dual voice coil? what ohm? rms rating?
Thread Starter
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Originally Posted by Independent1
Very Nice!
I have ordered a lot of vette essential stuff and it is top quality!! Can't go wrong with vette essential stuff.
What model corbeau seats? How do you like them? Were they easy to install?
It appears as if you are trying to sell this stuff. You might want to post in the C5 parts for sale section, if you have not already done so.
I have ordered a lot of vette essential stuff and it is top quality!! Can't go wrong with vette essential stuff.
What model corbeau seats? How do you like them? Were they easy to install?
It appears as if you are trying to sell this stuff. You might want to post in the C5 parts for sale section, if you have not already done so.
Racer
Joined: Oct 2005
Posts: 474
Likes: 0
From: Panama City Beach FL
Originally Posted by vettethret
Let me find out the specs. I have a 1200 watt amp running them so they can take plenty of power. I wanted bass but I wanted a clean sound as well. The box comes with both rear carbon fiber leather covers and the blue lighted panel in the trunk.
pics on the way? j_burback@yahoo.com
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
Thread Starter
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Le Mans Master
Joined: Mar 2005
Posts: 5,492
Likes: 39
From: Tampa Florida
does it come with the bottom piece the previous amps sat in? Im trying to get specs to see if these will work with my cadence amp
btw do you have the piece that covered the gap between the box and the window? so you cant see the silver
btw do you have the piece that covered the gap between the box and the window? so you cant see the silver
Thread Starter
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Originally Posted by PolishDude
does it come with the bottom piece the previous amps sat in? Im trying to get specs to see if these will work with my cadence amp
btw do you have the piece that covered the gap between the box and the window? so you cant see the silver
btw do you have the piece that covered the gap between the box and the window? so you cant see the silver
Thread Starter
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Originally Posted by PolishDude
does it come with the bottom piece the previous amps sat in? Im trying to get specs to see if these will work with my cadence amp
btw do you have the piece that covered the gap between the box and the window? so you cant see the silver
btw do you have the piece that covered the gap between the box and the window? so you cant see the silver
Le Mans Master
Joined: Mar 2005
Posts: 5,492
Likes: 39
From: Tampa Florida
Originally Posted by vettethret
Nice wheels by the way!
Any discount for repeat customers? trying to decide if i want something more flashy then my current setup which sounds pretty good and is very practical, this would not permit me to put a 2nd girl in the trunk anymore
Thread Starter
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Originally Posted by PolishDude
haha thanks
Any discount for repeat customers? trying to decide if i want something more flashy then my current setup which sounds pretty good and is very practical, this would not permit me to put a 2nd girl in the trunk anymore
Any discount for repeat customers? trying to decide if i want something more flashy then my current setup which sounds pretty good and is very practical, this would not permit me to put a 2nd girl in the trunk anymore
Drifting
Joined: Jun 2004
Posts: 1,936
Likes: 0
From: Las Vegas NV
Thread Starter
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Originally Posted by Twil1ght
Interested in the straight pipes.. pics to twil1ght@hotmail.com pls.
Pics sent.
Le Mans Master
Joined: Mar 2005
Posts: 5,492
Likes: 39
From: Tampa Florida
Originally Posted by vettethret
I'll do $500 shipped. Shipping and packing will cost me AT LEAST $150, so I'm not netting that much. It cost me over 2k for this set up.
Last edited by PolishDude; Oct 17, 2006 at 09:27 AM.