When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I had to tell someone.I just orderd my vortech supercharger from Andy at A&A! Hoping to have it early next week. With any luck installed and running by next weekend . Any tips on the install would be greatly appreciated.
Hopefully 500 rwhp ! Andy says 475-480 My motor is stock internals a4
I dont want get carried away. I will let you know actual #'s after the install and dyno tune.
Take your time and hang out with the elite seasoned ones in Forced Induction section as much as you can. Andy will give you the top notch customer service and is available on his cell phone any time day or night to help out his customers.
BTW, pinning the crank is a real biatch. Also, make sure you get the car properly street and dyno tuned and above all dont get greedy. Force Induction is addictive
Take your time and hang out with the elite seasoned ones in Forced Induction section as much as you can. Andy will give you the top notch customer service and is available on his cell phone any time day or night to help out his customers.
BTW, pinning the crank is a real biatch. Also, make sure you get the car properly street and dyno tuned and above all dont get greedy. Force Induction is addictive
Could not have said it better and good luck with the install
what is the pinning of the crank everyone keeps talking about??? im confused?
At any rate, Congrats Eric! FI is a huge step in the hp world, be careful with it!!!
Aj
P.S...Im a Zuki fan...Kawasucki is what i heard... LOL.. just playing!
Pinning the crank consists of drilling the crank pulley and crankflange. Then inserting a 1/4" pin so under boost the pulley wont spin on the crank.
I own a kawasaki dealership in Annville Pa so i am a little biased.
Pinning the crank consists of drilling the crank pulley and crankflange. Then inserting a 1/4" pin so under boost the pulley wont spin on the crank.
I own a kawasaki dealership in Annville Pa so i am a little biased.
OHHH!!! LOL... no im just kidding. i absolutely hate Kawi green... but i love the bikes and their styling. Looking at a ZX10 right now to replace my 01 gix 750...
pinning the crank seems like a b!tch of a job... good luck with that! your going to love boost!
Aj