[Z06] NEW guy and got Qs
Thread Starter
1st Gear
Joined: Jan 2007
Posts: 1
Likes: 0
NEW guy and got Qs
im about to get a ZO6 and wanted to know about lowering a vette i sall a vette real low and he said it had no bolt or nuts in the front and 7inch ones in the rear. what does that mean? i want to get 19s all around and want there to be no gap front or back.
Melting Slicks
Joined: Oct 2006
Posts: 2,236
Likes: 61
From: Branford, Connecticut
I am all for lowereing Z06's, and the longer boltds in the back are definitely the way to go. I actually used the longer bolts and cut some of the bushing in the back. I also cut the bushing off in the front, but I would not advise taking the bolt out of the front. The ride was harsh enough with just the bushing cut, I cant imagine it with the bolt totaly removed here is a pic of the 04 that I had with the longer rear bolts and the front bushing cut.
Advanced
Joined: Jan 2007
Posts: 80
Likes: 0
From: Works at GT PRO Performance Tuning Modifying C5/6 Z06's in Fullerton CA, WWW.SOCALCORVETTE.COM
what year are you getting? We just finished up another coilover conversion on a 2007 Z06. The ride is very comfortable, actually a bit better than stock, and has quite a bit more predictability in high speed corners. Maybe an option..I'm just not a huge fan of lowering the factory suspension.
