[Z06] Z06 emblem placement
Thread Starter
Drifting
Joined: May 2006
Posts: 1,871
Likes: 0
From: Arlington Texas, originally from San Angelo, TX
Z06 emblem placement
Hey guys, I was wondering if you might have a template of some sort for installing the Z06 badges on the fenders and the C5 flags on the fascia? I recently got my car back from the bodyshop where a tigershark front fascia and 2004 carbon fiber hood were installed and I need to slap on the emblems. I would greatly appreciate the help as I really don't want the badges mis-aligned.
Thanks,
Thanks,
Le Mans Master
Joined: Sep 2003
Posts: 8,847
Likes: 795
From: Longview Texas
If you don't come up with a template, the dimensions in the chassis service manual are:
From the bottom FRONT corner of the emblem to the fender/hood seam is 8.5 inches
From the bottom REAR corner of the emblem to the fender/hood seam is 8.4 inches
From the rear edge of the emblem to the rear edge of the fender (fender/door seam) is 6.24 inches.
You could use masking tape to mark guidelines until it looks right, then apply the emblem..
From the bottom FRONT corner of the emblem to the fender/hood seam is 8.5 inches
From the bottom REAR corner of the emblem to the fender/hood seam is 8.4 inches
From the rear edge of the emblem to the rear edge of the fender (fender/door seam) is 6.24 inches.
You could use masking tape to mark guidelines until it looks right, then apply the emblem..
Drifting
Joined: Apr 2006
Posts: 1,382
Likes: 0
From: Va Beach VA
St. Jude Donor '07-'08-'09-'10
FedEx Bowl 4 St. Jude '09
I have the same issue with some new paint. I am waiting a few weeks to put the emblems on put I thought the other day,"Where do they go on the fender"
Thanks for the info. I would hate to get mistaken for a FRC, haha
Thanks for the info. I would hate to get mistaken for a FRC, haha
