When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That system is incredible - Mallet used to sell it (or something just like it) - used a couple of carbon cannisters, I think there was even some small mod to the frame to accommodate the install.
Always wanted to hear what it sounds like
It has more of an F1 sound than a muscle car sound, kinda quiet at idle. The headers gave it a little more muscle car sound and it screams at WOT. I get lots of compliments on the exhaust note.
Well going TOO low would be rice if it severely impacts the performance of the car. A little lower aint no thang, and it does look cool... well, when its not scraping on the driveway hehehe.
i have enough problems trying to get around dips and bumps with the stock height, I'd shoot myself if it got any lower
Mine is lowered on the stock bolts... which amounts to 1/2" on a Z51 C5. After lowering and an alignment, the car handles great (well, the Hotchkis sway bars help too )
Lowered on stock bolts. I could drop it in the front a little more, but the rear is down all the way on the stock bolts. I prefer to call it "fired rice"
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.