Borla Stinger Question

Reply Subscribe

Thread Tools

Search this Thread

May 21, 2007 | 09:55 PM

c52k1NY

Thread Starter

Advanced

Joined: Mar 2005

Posts: 73

Likes: 0

Borla Stinger Question

I just had the 2 tip stingers installed and the right side hangs a tad bit lower than the left. I have seen other pics on the forum where members cars have the same issue, is there a fix or am i stuck with it?

May 21, 2007 | 10:04 PM

Paulg680

Drifting

Joined: Jan 2006

Posts: 1,904

Likes: 1

From: Ellettsville Indiana

CI 7-8-9 & 12 Veteran

Wounded Warrior Escort '11

Loosen everything up and re-align, THEN tack weld each section so nothing moves. If possible, take the time to weld everything up completely.

May 21, 2007 | 10:07 PM

Dave68

Race Director

Joined: Dec 2000

Posts: 19,304

Likes: 85

From: San Diego CA

If I recall correctly, you can loosen one of the band clamps and rotate the pipe so that the exhaust tip will move up or down. I have quads, but the principle should be the same.

May 21, 2007 | 11:15 PM

rws.1

Race Director

Joined: Jul 2004

Posts: 16,795

Likes: 62

From: Lake Havasu City, AZ

place a 2x4 under and across the two tips.
Put a floor jack under the 2x4...( center the jack so it lifts the two tips evenly) gently lift until the tips are JUST supported...
loosen the clamps, lift a touch more... re- tighten the clamps, release the jack.... crack open the beer