Notices
C5 General General C5 Corvette and C5 Z06 Discussion not covered in Tech

[Z06] Splinter crack in front spring

Old Jul 16, 2007 | 12:04 PM
  #1  
Z06 Bob's Avatar
Z06 Bob
Thread Starter
Instructor
10 Year Member
 
Joined: Apr 2004
Posts: 136
Likes: 0
From: NJ
Default Splinter crack in front spring

I just noticed yesterday while the car was on the lift that there was a 4-5 inch splinter hanging from the front composite spring.
It is cracked enough that I can see the fiber under the surface of the spring, probaby an 1/16 inch thick sliver.

There are no signs of impact fore or aft, and definitely no off road excursions.


How serious is this and are these types of cracks prone to getting larger or catastophic failure?

Sorry I didn't have a camera to photograph.
Reply
Old Jul 16, 2007 | 03:07 PM
  #2  
HP_Addict's Avatar
HP_Addict
Melting Slicks
20 Year Member
Conversation Starter
All Eyes On Me
 
Joined: Apr 2003
Posts: 2,285
Likes: 16
From: Nashville TN
Default

They are not common but do haapen. The front spring on my Coupe did that. I trimmed the splinter and drove on it for several months. It did not progress further. I eventually replaced it with Z06 springs.
Reply
Old Jul 16, 2007 | 03:08 PM
  #3  
MUKAK's Avatar
MUKAK
Race Director
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2003
Posts: 11,061
Likes: 38
From: Menifee CA
Default

i would replace asap...

i broke my rear leaf going about 75-80 mph and almost lost control......
Reply
Old Jul 29, 2015 | 09:38 AM
  #4  
Luke's Papa's Avatar
Luke's Papa
Advanced
 
Joined: Jun 2015
Posts: 68
Likes: 1
From: Roanoke Virginia
Default

Originally Posted by Z06 Bob
I just noticed yesterday while the car was on the lift that there was a 4-5 inch splinter hanging from the front composite spring.
It is cracked enough that I can see the fiber under the surface of the spring, probaby an 1/16 inch thick sliver.

There are no signs of impact fore or aft, and definitely no off road excursions.


How serious is this and are these types of cracks prone to getting larger or catastophic failure?

Sorry I didn't have a camera to photograph.
Same thing on my 05. What I'd watch for is your front end getting lower. Find a way to measure it, wheel well, rocker panel, etc and measure again in a week or when you drive it. Mine got to below 24 inches at well. Replacing it is easy and springs are easy to find. I bought a used Z51 spring for under $200. Most folks say some type of engine or wheel cleaner is what made it delaminate.
Reply
Old Jul 29, 2015 | 01:53 PM
  #5  
philadd's Avatar
philadd
Pro
15 Year Member
Liked
Loved
 
Joined: Jan 2008
Posts: 549
Likes: 44
From: Houston TX
Default

This thread was from 8 years ago...
Reply
Old Jul 29, 2015 | 03:07 PM
  #6  
Luke's Papa's Avatar
Luke's Papa
Advanced
 
Joined: Jun 2015
Posts: 68
Likes: 1
From: Roanoke Virginia
Default

Originally Posted by philadd
This thread was from 8 years ago...
my bad
Reply

Get notified of new replies

To Splinter crack in front spring



Thread Tools
Search this Thread

All times are GMT -4. The time now is 04:34 PM.