Dashboard HELP!!!
Thread Starter
Drifting
Joined: Jun 2007
Posts: 1,437
Likes: 5
Dashboard HELP!!!
Well...i had a bubble appear on the console next to the temperature control dial(where the blue and red colors are)...looked like a air pocket on a tinted window...
I tried to fix it but it didn't work..
How hard is it to remove the plastic shroud around that and the radio, now it needs to be relpaced!
Pics/directions would be terrific.
Thanks a bunch
al
I tried to fix it but it didn't work..
How hard is it to remove the plastic shroud around that and the radio, now it needs to be relpaced!
Pics/directions would be terrific.
Thanks a bunch
al
Race Director
Joined: Aug 2003
Posts: 16,270
Likes: 30
From: "It's 106 miles to Chicago, we've got a full tank of gas, half a pack of cigarettes, it's dark, and
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-‘18-'19
NCM Sinkhole Donor
Race Director
Joined: Jul 2004
Posts: 16,795
Likes: 62
From: Lake Havasu City, AZ
Gene@Karshop (CF ID) will sell you a used one....
Gene Culley (CF ID) www.gmpartshouse.com will sell you a new one
CF supporting vendor TKO Peformance will sell you custom carbon fiber and woodgrain ones.. They take your old one as a core exchange
http://store.tkoperformance.com/cuinpi.html
Gene Culley (CF ID) www.gmpartshouse.com will sell you a new one
CF supporting vendor TKO Peformance will sell you custom carbon fiber and woodgrain ones.. They take your old one as a core exchange
http://store.tkoperformance.com/cuinpi.html
Thread Starter
Drifting
Joined: Jun 2007
Posts: 1,437
Likes: 5
A big Thanks!!!
To Blacksedan87 and RWS1
You guys saved me about 300 bux!!!
Gene sold me the part for $200 less than the dealer and with the link to the instructions on how to remove the dash bezel...another $100 in labor. I took me about 45 minutes and it was a fun project!
Best to you guys!
To Blacksedan87 and RWS1
You guys saved me about 300 bux!!!
Gene sold me the part for $200 less than the dealer and with the link to the instructions on how to remove the dash bezel...another $100 in labor. I took me about 45 minutes and it was a fun project!
Best to you guys!
