jacking pucks
Melting Slicks
Joined: Jul 2004
Posts: 2,340
Likes: 35
From: Folsom Lake CA
I used the BMW pucks today on a lift. Worked great. When you snap 'em in they will still move around a tiny bit if you push on them, but they are definitely in there, because when you try to pull 'em out, it takes a bit of prying, which is good because that means they should stay put. But, would they rattle if you leave them on and drive with them on? It sure would be nice to be able to leave them in, but I don't want to hear them rattle around, or worse fall out, because I don't want to lose them.
Anyone with experience in this area?
Anyone with experience in this area?
Race Director
Joined: Jan 2006
Posts: 10,554
Likes: 33
From: Not on either liberal coast.
I leave the BMW pucks on all the time. They do snap in tightly and they do not rattle. Removing them is easily done with a screw driver for leverage. They're hardly visible when installed. Unless your car is extremely lowered they should not cause you any concern unless running over roadkill and very tall speed bumps. I haven't lost one yet after 1,400 miles with them installed.
