[Z06] Help - C6 Shift knob
Race Director
Joined: Jan 2006
Posts: 10,554
Likes: 33
From: Not on either liberal coast.
The C5/Z06 **** is threaded 9/16-18". The C6/Z06 **** is attached with one small fastener through the side of the lever. It's not threaded 9/16-18". You can find vendors on EBAY that sell a modified C6/Z06 **** that will thread on to your C5/Z06 lever, but he cost is around $80 retail. Used are frequently selling for less in the CF classifieds.
If you're a DIY'er, you might be able to modify your oem C5/Z06 shifter lever by drilling a hole in the side to accept the newer style ****.
If you're a DIY'er, you might be able to modify your oem C5/Z06 shifter lever by drilling a hole in the side to accept the newer style ****.
Melting Slicks
Joined: May 2007
Posts: 2,533
Likes: 1
From: North Aurora IL
The C5/Z06 **** is threaded 9/16-18". The C6/Z06 **** is attached with one small fastener through the side of the lever. It's not threaded 9/16-18". You can find vendors on EBAY that sell a modified C6/Z06 **** that will thread on to your C5/Z06 lever, but he cost is around $80 retail. Used are frequently selling for less in the CF classifieds.
If you're a DIY'er, you might be able to modify your oem C5/Z06 shifter lever by drilling a hole in the side to accept the newer style ****.
If you're a DIY'er, you might be able to modify your oem C5/Z06 shifter lever by drilling a hole in the side to accept the newer style ****.
Well, said......It's not that hard.......take out the shifter....clamp it in a vise, drill it....re install it and shift to your enjoyment!
