[Z06] Shift Knobs - pics?
Thread Starter
Instructor
Joined: Oct 2001
Posts: 224
Likes: 0
From: Atlanta GA
Shift ***** - pics?
Took a look at the vendor mall, looking for something not gaudy (brushed aluminum would be nice), as short as possible.
Has to "fit in" with a stock black Z06 interior. Ideally it has a shift pattern imprinted but not a must. There was a nice looking oval-ish one that said Z06 towards the bottom of one of the mall pages...
Anyway, any practical experiences / pics? As ugly as the stock head is I admit it has a decent grab. Shorter and less square would be cool.
And speaking of long throws, saw a couple of kits in the mall to remedy that. How are they? What is the install like? I'd be looking for conservative shorter (mm not inches).
And while I'm placing an order, are all CAGS defeaters the same or should I go to a specific one?
Thanks as usual!
Has to "fit in" with a stock black Z06 interior. Ideally it has a shift pattern imprinted but not a must. There was a nice looking oval-ish one that said Z06 towards the bottom of one of the mall pages...
Anyway, any practical experiences / pics? As ugly as the stock head is I admit it has a decent grab. Shorter and less square would be cool.
And speaking of long throws, saw a couple of kits in the mall to remedy that. How are they? What is the install like? I'd be looking for conservative shorter (mm not inches).
And while I'm placing an order, are all CAGS defeaters the same or should I go to a specific one?
Thanks as usual!
Guest
Posts: n/a
Re: Shift ***** - pics? (newme)
I have the Momo "Anatomic Short". Black leather, very simple, very nice size and smaller to the hand than stock. I have to say I love it, and cannot imagine driving the car with the large stock **** any longer. About $48.00, and real easy to install.
Safety Car
Joined: Jul 2001
Posts: 4,261
Likes: 2
From: Fort Wayne,Indiana
Re: Shift ***** - pics? (newme)
I should be getting it in 5 days and will be putting it on the new Hurst shifter that should be released in about 2-3 weeks.I have been to Tower Shoppes and there is a good amount of Vettes.When are you going to start the mods?
Intermediate
Joined: Oct 2001
Posts: 45
Likes: 0
Re: Shift ***** - pics? (forfun)
Do not buy a Momo shifter! They are made to fit universally and are NOT solid shift *****. Not trying to flame, I've owned one, but the rubber spacers give a soft mushy feel that is terrible. JMHO, but Momo is a no-no.
Le Mans Master
Joined: Feb 2000
Posts: 5,708
Likes: 1
From: Bedford NH
Cruise-In II Veteran
Re: Shift ***** - pics? (catphish)
The Hardbar **** is very popular. It is available from LAPD (I am out of stock) for the same price. It is fully threaded internally and is made specifically for each application (i.e. no set screws, adapters, etc)
[Modified by ghoffman, 6:37 AM 11/13/2001]
[Modified by ghoffman, 6:37 AM 11/13/2001]
Team Owner
Joined: Nov 2000
Posts: 29,689
Likes: 9
From: Central Florida
Jax Events Coordinator
CI 3-4-5-6-7-8-9 Veteran
St. Jude Donor '03-'08
Re: Shift ***** - pics? (newme)
Ecklers - $45. Has the shift pattern engraved on the top. Its polished aluminum.
Here's a link to their site - http://www.ecklers.com/product.asp?p...dept%5Fid=1602
Here's a link to their site - http://www.ecklers.com/product.asp?p...dept%5Fid=1602
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
