CD Changer Bracket Question
Thread Starter
Instructor
Joined: Nov 2002
Posts: 244
Likes: 12
From: IL
CD Changer Bracket Question
I'm installing a CD Changer and having problems locating the bracket that you pop rivet / glue to the car. (the one with the 2 - 10mm bolts attached)
I have checked with a couple of parts desks and they have nothing from GM.
If you have a parts number please forward it. If you fabricated your own, what did you use for material?
Any help would be appreciated.
I have checked with a couple of parts desks and they have nothing from GM.
If you have a parts number please forward it. If you fabricated your own, what did you use for material?
Any help would be appreciated.
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 905
From: Lake Elsinore, CA
Here's a thread I posted about my installation.
http://forums.corvetteforum.com/show....php?t=1740665
http://forums.corvetteforum.com/show....php?t=1740665
Burning Brakes
Joined: May 2000
Posts: 1,097
Likes: 191
From: Vienna VA
Do you already have the COR-HAR harness? If not, then you can buy them both here I think:
http://www.mnrelectronics.com/corcdchanink.html
If you already have the harness, you might be able to sell the extra one on the forum.
http://www.mnrelectronics.com/corcdchanink.html
If you already have the harness, you might be able to sell the extra one on the forum.
Team Owner
Joined: May 2001
Posts: 36,836
Likes: 244
From: Dear Karma, I have a list of people you missed.
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
I'm installing a CD Changer and having problems locating the bracket that you pop rivet / glue to the car. (the one with the 2 - 10mm bolts attached)
I have checked with a couple of parts desks and they have nothing from GM.
If you have a parts number please forward it. If you fabricated your own, what did you use for material?
Any help would be appreciated.
I have checked with a couple of parts desks and they have nothing from GM.
If you have a parts number please forward it. If you fabricated your own, what did you use for material?
Any help would be appreciated.
BTW, the screws that go through the mounting brackets and into the CD changer are 11503044 (need six) are also metric.
The pop-rivets and sealant you'll have to provide yourself.
HTH
Safety Car
Joined: Jul 2001
Posts: 4,661
Likes: 67
From: Ocean Springs MS
This is where I got my changer. While they have the whole package listed as one item, if you call the parts dept, they will probably be able to send you the mounting hardware.
http://temp.corvetteforum.net/c5/ken...rtspage6.shtml
BTW - Fichtner is a supporting Vendor/Dealer, and has been for many years.
http://temp.corvetteforum.net/c5/ken...rtspage6.shtml
BTW - Fichtner is a supporting Vendor/Dealer, and has been for many years.
Race Director
Joined: Sep 2004
Posts: 17,786
Likes: 4
From: Redsox, Pats, Celts & Bruins !!! Redsox Nation !!!
St. Jude Donor '06-'07-'08-'09-'10-'11-'12
