looks awesome man!
Stripes Added! Pics Inside ---->
Melting Slicks
Joined: Nov 2004
Posts: 3,424
Likes: 0
From: Las Vegas Nevada
St. Jude Donor '07-'08
Not too much soap 
Get some baby shampoo and that is the best to make soapy solution.
Drop in 10 - 12 drops for 1 quart.
-Mike
***BTW, since you have had the stripes for a while, make sure to use the credit card to squeeze around the "twin turbo" lettering so when you peel the vinyl off the backing paper, the whole stripe goes together with the masking tape
Get some baby shampoo and that is the best to make soapy solution.Drop in 10 - 12 drops for 1 quart.
-Mike
***BTW, since you have had the stripes for a while, make sure to use the credit card to squeeze around the "twin turbo" lettering so when you peel the vinyl off the backing paper, the whole stripe goes together with the masking tape
Last edited by PUREFUN; Jan 21, 2008 at 10:35 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Safety Car
Joined: Feb 2004
Posts: 3,802
Likes: 0
From: monroeville pa
St. Jude Donor '04-'05-'06-'07-'08-'09-'10-'11-'12-'13
You did a good job they look nice i did mine last summer you think its simple to do until you have to do it its not an easy job to get the stripes just in the right place on the hood.
Former Vendor
Joined: Feb 2002
Posts: 7,812
Likes: 3
From: DFW, TX www.vettestripes.com
St. Jude Donor '03-'04-'05-'06-'07-'08
I may give you a free silver set if you take many good pictures for me since I don't have any pictures of that style
You will have to pay full price first and I will fully refund when getting good pictures
-Mike
Safety Car
Joined: Jul 2004
Posts: 3,770
Likes: 3
From: Dallas Texas
Thread Starter
Melting Slicks
Joined: Sep 2005
Posts: 2,307
Likes: 32
From: Trabuco Canyon CA
Thread Starter
Melting Slicks
Joined: Sep 2005
Posts: 2,307
Likes: 32
From: Trabuco Canyon CA
In response to the PM's I have been getting about the wheels;
I took each wheel off the car, prepped the outter ring with rubbing ach and let it air dry. I used 1/4" red pinstripe tape that I purchased from PepBoys for $5.99 and went to town. It was fairly time consuming, and to be honest I got much better on the 3rd and 4th wheel. It took about 2 hours start to finish to jack the car up, etc, etc.
Anyway, I LOVE the look and couldnt be any happier. I sold some iForged wheels for these, something I would have never thought possible...haha
Anyway, thanks for all the kind words and lets see YOUR pics if you try the same thing.
I took each wheel off the car, prepped the outter ring with rubbing ach and let it air dry. I used 1/4" red pinstripe tape that I purchased from PepBoys for $5.99 and went to town. It was fairly time consuming, and to be honest I got much better on the 3rd and 4th wheel. It took about 2 hours start to finish to jack the car up, etc, etc.
Anyway, I LOVE the look and couldnt be any happier. I sold some iForged wheels for these, something I would have never thought possible...haha
Anyway, thanks for all the kind words and lets see YOUR pics if you try the same thing.
Melting Slicks
Joined: Jan 2007
Posts: 3,103
Likes: 7
From: Sandy Ego Ca.
