Code Breaker
Thread Starter
Cruising
Joined: Sep 2003
Posts: 13
Likes: 0
From: Carlsbad Ca
Code Breaker
I have read the following codes from my Driver Information Center in my 2003 Corvette.
A0 LDCM U1064 H
A1 RDCM U1064 H
What I do know is LDCM stands for Left Door Control Module & Right Door Control Module (RDCM).
What is the code after these designations?
Any help would be greatly appreciated.
A0 LDCM U1064 H
A1 RDCM U1064 H
What I do know is LDCM stands for Left Door Control Module & Right Door Control Module (RDCM).
What is the code after these designations?
Any help would be greatly appreciated.
Last edited by jmeneijr; Mar 27, 2008 at 03:50 PM. Reason: Spelling
Safety Car
Joined: Jan 2001
Posts: 4,389
Likes: 693
From: Boise ID
From the manual:
DTCs U1016, U1064 and U1096 may be present when scrolling through the onboard diagnostics via the instrument cluster Driver Information Center (DIC).
Recommendation/Instructions:
This is a normal software function as long as the DTCs have a history status upon ignition cycling. No repair attempts should be made
DTCs U1016, U1064 and U1096 may be present when scrolling through the onboard diagnostics via the instrument cluster Driver Information Center (DIC).
Recommendation/Instructions:
This is a normal software function as long as the DTCs have a history status upon ignition cycling. No repair attempts should be made
Thread Starter
Cruising
Joined: Sep 2003
Posts: 13
Likes: 0
From: Carlsbad Ca
Code Breaker
Hi 87Sam,
Thank you for your answer. Are you refering to the Owners Manual or the Shop manual. I have both & will look again tonight.
I am not real impressed with the GM Shop Manual. I think Acura does a much better explanation.
Thanks again,
Jim
Thank you for your answer. Are you refering to the Owners Manual or the Shop manual. I have both & will look again tonight.
I am not real impressed with the GM Shop Manual. I think Acura does a much better explanation.
Thanks again,
Jim
