When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Finally the weather got nice here in Mi. so I could install new parts. Drilled and slotted rotors, new pads, painted calipers, and new wheels and tires. I know I will hear lower it but it is as low as I can go with high bank driveway, pic. included.
Dude, my driveway is twice as steep as yours and you cant even roll a tennis ball under my car. When you lower your car you just learn how to drive it diffrently, that's all. Go for it.
Dude, my driveway is twice as steep as yours and you cant even roll a tennis ball under my car. When you lower your car you just learn how to drive it diffrently, that's all. Go for it.
Seriously, your driveway is NOT that steep. That vette needs to be lowered, got a Tahoe 4x4 look going there...looks taller than a stock one! (the rest is nice though )
It is OK to scrape the plastic airdam, it's designed to do that.
I agree, that is a long slight slope driveway. Mine is lowered all the way on the factory stops and my drop at the end of my drive way is about a foot over a foot and a half run, barely scrapes the bottom fascia sometimes. I'd go for it.
+1 on the driveway being manageable lowered. As long as you can come in at a sharp angle and get the edge of the inside tire on the slope to lift the rest of the front up, you're good. Looks more than do-able from the pics. Your car is just begging to ride a good 2.5" lower.
If not, I'd have already been back from Home Depot making a driveway ramp.