Cam
Thread Starter
Le Mans Master
Joined: Mar 2008
Posts: 5,367
Likes: 0
From: Albuquerque New Mexico
Cam
So I want to cam my car pretty soon and I have quick question, me and my friends have cammed his 00 T/A and another friends 06 GTO, now its my turn, how complicated is it on the vett because of the way that the motor sits, does the front bumper need to be removed? also the steering?
Any comments would be helpful
Any comments would be helpful
Le Mans Master
Joined: Aug 2005
Posts: 7,201
Likes: 0
From: DP(oh you know where) IL
St. Jude Donor '06
not too difficult. i could of done it at the hotel parking lot in bowling green during the cruise in. i was basically at the cam in 3 hrs. i have already done it once before this winter, so that helped. but let me find you the links for it, or you can do a search, there have been a few recent posts about cams
here is what i used
http://www.ls1howto.com/index.php?article=1
just skip over the heads part you wont need that unless your doin heads.
also used this link
http://www.ls1howto.com/index.php?article=23
only thing that we advise against is re-using the old crank bolt as a pulley installer.
here is what i used
http://www.ls1howto.com/index.php?article=1
just skip over the heads part you wont need that unless your doin heads.
also used this link
http://www.ls1howto.com/index.php?article=23
only thing that we advise against is re-using the old crank bolt as a pulley installer.
Last edited by DPG; May 29, 2008 at 01:47 PM.
Racer
Joined: Nov 2006
Posts: 270
Likes: 0
From: Dallas Texas
