Cowl seal replacement.
Thread Starter
Race Director
Joined: Oct 2004
Posts: 18,401
Likes: 3
From: Retired but working
Cruise-In VI Veteran
Cowl seal replacement.
The seal between my windshield and the cowl came loose in a few areas so this weekend I decided it was time to replace the tape that hold it in place.
It was pretty straight forward although I had to pick up a battery terminal remover to pop the wipers.
One thing that amazed me was the fact that I have been milking the utters regulary so I would not get any water under the WSW motor and there was still all types of crap under the motor back by the 3rd udder.
Removed it all and flushed out the area, replaced the seal, used a lot of Back-toBlack and refit everything. Looks great.
It was pretty straight forward although I had to pick up a battery terminal remover to pop the wipers.
One thing that amazed me was the fact that I have been milking the utters regulary so I would not get any water under the WSW motor and there was still all types of crap under the motor back by the 3rd udder.
Removed it all and flushed out the area, replaced the seal, used a lot of Back-toBlack and refit everything. Looks great.
