Part number needed
Thread Starter
Racer
Joined: Apr 2003
Posts: 473
Likes: 2
From: Columbus Ohio
Part number needed
On a 2003 Z06 , in the engine bay, there is a large stainless steel braided hose on the drivers side that goes through the red fuel rail cover. I think this is a fuel line, but maybe not. This hose has two retainer clips, one at each end. One is on the end of the hose that connects to the engine and one that connects to the fitting that goes to the firewall. I need the part number of the retainer clip that connects the hose to the fitting at the firewall. Its a little silver clip that holds the hose to the fitting. Any help would be appreciated.
Last edited by Piranha; Jun 20, 2008 at 12:53 PM. Reason: Typos
Safety Car
Joined: Jan 2006
Posts: 3,940
Likes: 42
From: shavertown Pa.
If you went to the dealer he will have pics of what you need and numbers, that way you can see if you can just buy what you need or have to buy something else to get it.
They won't charge you anything for the numbers and they may have what you need if the peice breaks often.
Good Luck
They won't charge you anything for the numbers and they may have what you need if the peice breaks often.
Good Luck
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
On a 2003 Z06 , in the engine bay, there is a large stainless steel braided hose on the drivers side that goes through the red fuel rail cover. I think this is a fuel line, but maybe not. This hose has two retainer clips, one at each end. One is on the end of the hose that connects to the engine and one that connects to the fitting that goes to the firewall. I need the part number of the retainer clip that connects the hose to the fitting at the firewall. Its a little silver clip that holds the hose to the fitting. Any help would be appreciated.
Here you go.
GM PART # 10276208
CATEGORY: Fuel Lines
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $5.77
OUR PRICE: $3.42
DESCRIPTION: CLIP
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Drifting
Joined: Dec 2004
Posts: 1,820
Likes: 2
From: San Diego
This post is TOTALLY unsolicited.
I see CorvetteRecycling helping out here! Good for ya' guys!
If you guys haven't checked with these guys for parts I highly recommend that you do! They are tops!!!!
Fast, fast response. Excellent customer service. Good prices too!
I used them for the 1st time a week or so ago. Was totally impressed by their customer service and rapid response.
Give 'em a try in the future!
..rickko..
I see CorvetteRecycling helping out here! Good for ya' guys!
If you guys haven't checked with these guys for parts I highly recommend that you do! They are tops!!!!
Fast, fast response. Excellent customer service. Good prices too!
I used them for the 1st time a week or so ago. Was totally impressed by their customer service and rapid response.
Give 'em a try in the future!
..rickko..