Need code help.
Thread Starter
Race Director
Joined: Jul 2007
Posts: 18,681
Likes: 47
From: Reno is so close to Hell you can see Sparks , State Of Confusion
St. Jude Donor '12-'13-'14
Need code help.
I got a code today, It was an H code and I deleted it and all is fine, My question is what the heck is U1160 - Loss of Communications with DDM. What is DDM?
Thanks.
Bill
Thanks.
Bill
Safety Car
Joined: Aug 2007
Posts: 4,506
Likes: 0
From: This is not a Song, It's an Outburst: Or, The Establishment Blues; Sixto Diaz Rodriguez
Race Director
Joined: Nov 2003
Posts: 12,346
Likes: 5
From: Mustang OK
DTCs U1001-U1254 are lost communication error messages. The C5 modules are connected via a class 2 serial data circuit. Each module on the class 2 serial data circuit which is powered and performing functions that require a detection of a communications malfunction is required to send a Node Alive message every 2 seconds. When no message is detected from a module in 5 seconds a DTC will be set. The last 3 numbers in the DTC is the ID number of the module that is not communicating. (e.g., U1160H - In this case 160 is the module ID for the DDM.)
HTH
Last edited by GrayC5; Jul 24, 2008 at 06:34 PM.
