When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My 2000 automatic climate control is acting erratically. When I push the "Auto" button the a/c fails to come on (outside temp 98 degrees). I can turn on the a/c manually and adjust the fan speed etc. I've checked the dic, and there are no codes set in the HVAC module. Any hints on where to start looking? The temp. lcd is normal brightness.
Thanks
My 2000 automatic climate control is acting erratically. When I push the "Auto" button the a/c fails to come on (outside temp 98 degrees). I can turn on the a/c manually and adjust the fan speed etc. I've checked the dic, and there are no codes set in the HVAC module. Any hints on where to start looking? The temp. lcd is normal brightness.
Thanks
shot in the dark here ,but I wonder if you need to replace the inside sensor , right next to the ignition . good luck !
It seems to get just as cold (manually) but the temp. **** won't increase from 60-61 degrees (ambient temp is around 96-100 degrees. I' don't think I've ever tried to increase the temp. when it's that hot outside, but I'd think you should be able to set it at 70 or so.
I'm not sure how much a new unit would cost but I suspect it would be pricey. You could try this CF Vendor that Z06 Jim recommended. He may find you a used spare.