front airflow question?
Thread Starter
Instructor
Joined: Feb 2008
Posts: 114
Likes: 0
From: elk grove california
front airflow question?
i have a 99 frc. the front has the plastic holders for the round foglights with the air flow blocked off. Instead of payin 80$ for the z06 airflow kit can i remove those and cut out the extra plastic so air can flow in?
If so what is the easiest way to remove them?
thankyou,
If so what is the easiest way to remove them?
thankyou,
Team Owner
Joined: Jun 2007
Posts: 30,770
Likes: 41
From: Down the Shore New Jersey, Elev.3 feet
St. Jude Donor '17
I am going to drill 1" holes in mine when I ever get around to it. I have the ZO6 screens on so it really will not show but will let more air in.I didn't really think I would have to remove them....guess I'll find out.
Burning Brakes
Joined: Dec 2004
Posts: 854
Likes: 70
From: Byrnes Mill MO
I removed mine then drilled the holes. I didn't want to take a chance on the drill hitting anything.
Now that I have a Vararam I no longer need these. I will sell them to you for $30.00 shipped.
Just put the vette on ramps or jack stands; remove the access panels to the fog light area (5 7mm bolts); remove the fog lamp; remove the bezel.
Now that I have a Vararam I no longer need these. I will sell them to you for $30.00 shipped.
Just put the vette on ramps or jack stands; remove the access panels to the fog light area (5 7mm bolts); remove the fog lamp; remove the bezel.
Administrator
Joined: Mar 2001
Posts: 367,760
Likes: 24,682
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Just drill some holes in them. If you want to take them out, you need to go in through the access panel under the front fascia. They are held in with several screws.
