Painted engine plastics question...
Thread Starter
Le Mans Master
Joined: Jan 2007
Posts: 7,364
Likes: 6
From: Rocky Mount Virginia
Painted engine plastics question...
Has anyone ever painted their engine plastics that do NOT match the exterior color? I know of the chromes, stainless, or even flame theme. But what about a contrasting color? Just trying to get ideas....
Thanks!
Thanks!
Former Vendor
Joined: Dec 2006
Posts: 11,573
Likes: 0
From: The AutoBuffs Army is unmatched in the Custom world! www.autobuffs.net
S. Jersey Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '08-'09-'10
Cruise-In IX Veteran
I will try and get some pics up later today.
John@autobuffs.net
Auto Buffs LLC.
2 Kerry Ct,; Suite E
Southampton, NJ 08088
609-859-0900
www.autobuffs.net
Custom Painting & Airbrushing
Pinstriping
Custom Detailing
Car Audio
Mobile Electronics & Video
Remote Car Starters / Alarms
Authorized IFORGED Dealer
Authorized East Coast Supercharging Dealer
Authorized TireRack Dealer
Exclusive D2FORGED Distributor
Former Vendor
Joined: Dec 2006
Posts: 11,573
Likes: 0
From: The AutoBuffs Army is unmatched in the Custom world! www.autobuffs.net
S. Jersey Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '08-'09-'10
Cruise-In IX Veteran
John@autobuffs.net
Auto Buffs LLC.
2 Kerry Ct,; Suite E
Southampton, NJ 08088
609-859-0900
www.autobuffs.net
Custom Painting & Airbrushing
Pinstriping
Custom Detailing
Car Audio
Mobile Electronics & Video
Remote Car Starters / Alarms
Authorized IFORGED Dealer
Authorized East Coast Supercharging Dealer
Authorized TireRack Dealer
Exclusive D2FORGED Distributor
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Race Director
Joined: Jun 2003
Posts: 14,051
Likes: 9
From: Houston TX
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 906
From: Lake Elsinore, CA
Yes, it was the typical process of prep, coat, wet-sand, prep, coat, wet-sand, etc. I sanded on the raw frc's for quite a while to minimize the textured surface before applying the first primer coat. That way I didn't need any filler to smooth the finish out and didn't need to layer the coats as much to acheive the smoothness I wanted. The primer has a flex component and is meant for flexible pieces such as bumpers to prevent cracking. I didn't use any adhesive promoter, although it's probably a good idea.
Before
Upper is unsanded - lower, sanded
Ready for primer
Primered, wet-sanded and ready for color
Color coated, wet-sanded and ready for clear
Cleared, wet-sanded progressively up to 2000 grit and polished
It's important to take your time and guard against dirt/particulate and contaminant as much as possible, especially since you're doing it in a dirty environment rather than a spray booth (unless you rig up a temporary one). This is just my method - I am definitely an amatuer.
Before
Upper is unsanded - lower, sanded
Ready for primer
Primered, wet-sanded and ready for color
Color coated, wet-sanded and ready for clear
Cleared, wet-sanded progressively up to 2000 grit and polished
It's important to take your time and guard against dirt/particulate and contaminant as much as possible, especially since you're doing it in a dirty environment rather than a spray booth (unless you rig up a temporary one). This is just my method - I am definitely an amatuer.
Melting Slicks
Joined: Jun 2001
Posts: 2,400
Likes: 1
From: Woodbridge Va
Melting Slicks
Joined: Jun 2001
Posts: 2,400
Likes: 1
From: Woodbridge Va
It's important to take your time and guard against dirt/particulate and contaminant as much as possible, especially since you're doing it in a dirty environment rather than a spray booth (unless you rig up a temporary one). This is just my method - I am definitely an amatuer.
Melting Slicks
Joined: Jun 2001
Posts: 2,400
Likes: 1
From: Woodbridge Va
Thanks Patches! I thought about going fully smoothed (filling in the Corvette letters) and having 'Lowcash' airbrushed on the covers; but figured I'd start with 'baby steps' 
I'd like to do something like this, but I know the limits of painting ability and artistic skillset.
Autobuffs work
I thought about going fully smoothed (filling in the Corvette letters) and having 'Lowcash' airbrushed on the covers; but figured I'd start with 'baby steps' I'd like to do something like this, but I know the limits of painting ability and artistic skillset.
Autobuffs work
Former Vendor
Joined: Dec 2006
Posts: 11,573
Likes: 0
From: The AutoBuffs Army is unmatched in the Custom world! www.autobuffs.net
S. Jersey Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '08-'09-'10
Cruise-In IX Veteran
John@autobuffs.net
Auto Buffs LLC.
2 Kerry Ct,; Suite E
Southampton, NJ 08088
609-859-0900
www.autobuffs.net
Custom Painting & Airbrushing
Pinstriping
Custom Detailing
Car Audio
Mobile Electronics & Video
Remote Car Starters / Alarms
Authorized IFORGED Dealer
Authorized East Coast Supercharging Dealer
Authorized TireRack Dealer
Exclusive D2FORGED Distributor
