[Z06] Z06 windshield
Thread Starter
Racer
Joined: Dec 2007
Posts: 407
Likes: 0
From: Jax Fl
Z06 windshield
I'm replacing my windshield due to small imperfections. it's the original Z06(4.8mm)windshield. if it comes out in one piece(it should), any interest? Do not want to ship due to obvious reasons.
Burning Brakes
Joined: Sep 2008
Posts: 939
Likes: 0
From: Clarksville TN
I have a small spider crack in mine due to a rock I picked up on the interstate the day I bought my car.
I'm in Jacksonville with work till the 23rd
Drifting
Joined: Aug 2007
Posts: 1,969
Likes: 8
From: Champaign IL
Ahhh, I don't think they will get your windshield out in one piece!
I had one replaced on my Cobra, this summer. (It was just cracked)
Guy, installed plastic sheeting on my dash, and protected my hood with big matts. Removed moldings. Then Punched a hole in the corner of the glass with a tool. Used a Wire Saw to CUT the windshield Glass into two pieces. Then Removed the moldings and scraped the old adhesive and remaining smaller pieces of glass. I pretty sure this is how it will be done for corvettes too..
I had one replaced on my Cobra, this summer. (It was just cracked)
Guy, installed plastic sheeting on my dash, and protected my hood with big matts. Removed moldings. Then Punched a hole in the corner of the glass with a tool. Used a Wire Saw to CUT the windshield Glass into two pieces. Then Removed the moldings and scraped the old adhesive and remaining smaller pieces of glass. I pretty sure this is how it will be done for corvettes too..
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Tech Contributor
Joined: Oct 1999
Posts: 41,058
Likes: 9,817
From: Charlotte, NC (formerly Endicott, NY)
Since you have the one that shows the 4.8mm thickness you may want to keep it. I just had my windshield replaced for the second time and original windshield is no longer available through GM's parts departmnts. The windshield they provide is the correct thickness but the part number is different and the 4.8mm thickness isn't printed in the corner anymore. I spent several months working this out with GM and State Farm before the windshield was ordered.
Bill
Bill
Burning Brakes
Joined: Nov 2001
Posts: 955
Likes: 4
From: Union City, CA
Supporting Vendor
Joined: Feb 2009
Posts: 4,421
Likes: 1,430
From: Mesa Az
i had mine replaced that had a crack start from the upper passenger side go all the way down to at an angle to almost right in front of my eyes and the glass guy got it out in one piece super easy. watched him do it not because i'm **** but because he actually was a neat guy to talk to. was the guy they glass company sent out for specialty cars, asked him what other one's he was doing and needless to say mine was the crappiest of the bunch lol!!!
Race Director
Joined: Feb 1999
Posts: 19,659
Likes: 34
From: Lenoir City Tennessee
Ci 6, 8 & 10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15
