Smooth Air Coupler installed...
Premium Supporting Vendor
Joined: Oct 2004
Posts: 36,838
Likes: 438
From: Manassas Park VA
St. Jude Donor '07-'08,-'13-'14, '16-'17
Wow, what a beautifully maintained engine bay 
I looks like it belongs
Tks again
Peace
Chip
I looks like it belongs
Tks again
Peace
Chip
__________________
..................Click for
..................Click for
Administrator
Joined: Mar 2001
Posts: 368,338
Likes: 24,779
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
A little more color to the engine bay never hurt anything.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: Jan 2006
Posts: 10,554
Likes: 33
From: Not on either liberal coast.
That looks good. I like the color coordinated to the body color on your car.
If you want to carry it one step further w/o breaking the bank, you can use "constant torque" stainless clamps instead of the worm drive clamps. You can find them at NAPA in a good selection.
Just over tighten the constant torque clamp on the air bridge side or it will collapse the thin plastic. You also have to compress the clamp slightly to give it the oval shape of the air bridge. The constant torque will never loosen as the worm drive clamps tend to do...
If you want to carry it one step further w/o breaking the bank, you can use "constant torque" stainless clamps instead of the worm drive clamps. You can find them at NAPA in a good selection.
Just over tighten the constant torque clamp on the air bridge side or it will collapse the thin plastic. You also have to compress the clamp slightly to give it the oval shape of the air bridge. The constant torque will never loosen as the worm drive clamps tend to do...
