Exhaust Plate.
Thread Starter
Melting Slicks
Joined: Aug 2007
Posts: 2,123
Likes: 2
From: Humble TX
St. Jude Donor '09-'10-'11-'12
From Fleabay
I really didn't search too hard so I don't really know. I would have liked black chrome.
Sounds Sweet 
I actually purchased these from an authorized dealer, so I don't think this is a problem in this particular situation.
Looked around and could find them in yellow. I didn't consider it in the same league as putting Z06 badges on my Vert
Thanks for all the kind words. I'm considering lighting it a LED. Haven't decided.
Nice work
Any chance you might know where I could get a blank reflective black plate? I've been wanting to make my own for awhile but was thinking of a reflective black plate (like a knock off black chrome) with either an MY or a silver reflective C5 flag. Any ideas where to look?
Any chance you might know where I could get a blank reflective black plate? I've been wanting to make my own for awhile but was thinking of a reflective black plate (like a knock off black chrome) with either an MY or a silver reflective C5 flag. Any ideas where to look?
I'm doing the same thing!
I bought a piece of thin stainless at the hardware store and scored it with a mat knife then snapped it (be careful). I also rounded the corners with a dremel then turned the surface in the drill press with a 3/4" wire brush. I need to order the black "Jakes" yet.
I bought a piece of thin stainless at the hardware store and scored it with a mat knife then snapped it (be careful). I also rounded the corners with a dremel then turned the surface in the drill press with a 3/4" wire brush. I need to order the black "Jakes" yet.
Looked around and could find them in yellow. I didn't consider it in the same league as putting Z06 badges on my Vert
Thanks for all the kind words. I'm considering lighting it a LED. Haven't decided.
Thread Starter
Melting Slicks
Joined: Aug 2007
Posts: 2,123
Likes: 2
From: Humble TX
St. Jude Donor '09-'10-'11-'12
Drifting
Joined: Jun 2001
Posts: 1,718
Likes: 13
From: Katy TX
St. Jude Donor '12
Great work. I did something similar. But instead of taking the sticker approach, I went to work with a roll of tape and a stencil. I should have used a sticker. Much easier.
Cheap plate, a couple cans of paint - all done!
chris
Cheap plate, a couple cans of paint - all done!
chris
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Administrator
Joined: Mar 2001
Posts: 368,384
Likes: 24,790
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Looks good - not your run of the mill exhaust plate.
