Cutting Front Bushings

Reply Subscribe

Thread Tools

Search this Thread

Mar 16, 2009 | 11:05 PM

1SHADYZ

Thread Starter

Pro

Joined: Jun 2008

Posts: 688

Likes: 1

From: Levittown New York

Cutting Front Bushings

Alright, Im looking to lower the Z some more. For the rear I already have longer bolts so Im set in the rear to match the front. By cutting the front bushings how low can I get the car by going all the way? I'd like to see some pics with stock size Z06 wheels with the front bushings cut, maxed out.

How about removing the front bolts completely? What are the goods and bads about that idea?

Thanks!!!

Mar 17, 2009 | 12:58 AM

slothy

Drifting

Joined: Feb 2008

Posts: 1,765

Likes: 2

From: St. Clair Shores Mi

stock bushings cut and max'd front and rear (stock bolts - cut bushings - lower bushing cut down to 1 layer)

Mar 17, 2009 | 05:19 PM

1SHADYZ

Thread Starter

Pro

Joined: Jun 2008

Posts: 688

Likes: 1

From: Levittown New York

Verrry nice!!!

Any info on the front bolt completely removed?

Mar 17, 2009 | 05:35 PM

zeevette

Race Director

Joined: Sep 2005

Posts: 11,060

Likes: 291

From: Pasco WA

Cutting the bushing only gives about 3/8", and removing the bolt after that won't make more than 1/8" difference. This is based on my personal experience, but results may vary.

Mar 17, 2009 | 06:21 PM

1SHADYZ

Thread Starter

Pro

Joined: Jun 2008

Posts: 688

Likes: 1

From: Levittown New York

So you have removed the bolts? How was everything with that? Whats the negative parts on that.

Reply Subscribe