Turn signal HELP!!
Thread Starter
Racer
Joined: Mar 2009
Posts: 380
Likes: 5
From: Sanford NC
I fixed the turn signal issue...It was the contacts in the multifunction switch. The contacts were black on the bottom, so I got some 400 grit sand paper and cleaned all the contact points. When I finished sanding, I sprayed some electrical cleaner in the switch, installed it back in the car and bam they are working! Thanks for all the help with this.
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
I fixed the turn signal issue...It was the contacts in the multifunction switch. The contacts were black on the bottom, so I got some 400 grit sand paper and cleaned all the contact points. When I finished sanding, I sprayed some electrical cleaner in the switch, installed it back in the car and bam they are working! Thanks for all the help with this.
