New Heads - Help
Thread Starter
Pro
Joined: Jun 2002
Posts: 636
Likes: 0
From: Finksburg MD
New Heads - Help
Ok, I have had these ls6 heads from TSP in my garage for some time now and I am going to put them on. I know I need a gasget kit but what else? I have Iridium plugs in there, I should replace those but with what? What else do I need? Also what else should I do while I have it apart? Thanks for your help?
Race Director
Joined: Jun 2004
Posts: 19,459
Likes: 48
From: Schaumburg IL
CI 7-8-9-11 Veteran
St. Jude Donor '06-'10, '13
LS1 tech has some good instructions...but if I were you I would have someone that has some experience help you out. The LS1 is pretty straight forward to work on, however lots of things could easily go wrong if you don't know what your doing. Also, do you have the stock cam in your car? Kinda waste of time to swap heads if you are just using a stock cam IMO.
not trying to be an azzhole...just a few things to think about.
Good luck
not trying to be an azzhole...just a few things to think about.
Good luck
It will never be easier than when you replace the heads
