***Interior & Exterior LED Upgrades for your C5***
#62
Melting Slicks
Cove kit:
Fender Cove led kit comes with 2 waterproof led strips w/12 leds on each strip, remote control box and 2 extended range remotes. The kit is also fused for protection. You have the power to control when these come on! Kit is completely wired with just 2 electrical connections to make near the battery. No wires or switches to mount inside the car. Approx install time is 1 hr. This mod turns heads and really gets your vette noticed! Available colors are red ,blue, white, yellow, green, amber or orange.
Order here: http://www.shop.jwmotoring.com/produ...4&productId=28
Footwell:
Footwell led floodlights; Change out those weak factory bulbs to these very bright floodlight leds. Plugs directly into the factory housing but you can mount them anywhere you like. Comes with adhesive backing but there are many mounting options. These are the brightest and most effective leds I have found so you will not be dissappointed! Kit comes complete with instructions and leds for both footwells.Colors available are red,blue,green,white,orange.
Order here: http://www.shop.jwmotoring.com/produ...4&productId=29
Led door reflector kit swap:
Led door reflector kits; Send me your good door reflectors to be converted to a 9 led reflector kit. Intructions for sending the unit will be provided after sale. Kit comes complete with wiring harness to wire into the footwell lights so they come on when the doors are opened or the interior lights come on. Wiring harness also has extra connections for optional "puddle" led strips on the bottom of the door. Reflectors only work with red but the puddle lights can be any color. Door panel and courtesy light panel removal required for wiring. Complete instructions included. Covers both doors.
Order here: http://www.shop.jwmotoring.com/produ...4&productId=30
Fender Cove led kit comes with 2 waterproof led strips w/12 leds on each strip, remote control box and 2 extended range remotes. The kit is also fused for protection. You have the power to control when these come on! Kit is completely wired with just 2 electrical connections to make near the battery. No wires or switches to mount inside the car. Approx install time is 1 hr. This mod turns heads and really gets your vette noticed! Available colors are red ,blue, white, yellow, green, amber or orange.
Order here: http://www.shop.jwmotoring.com/produ...4&productId=28
Footwell:
Footwell led floodlights; Change out those weak factory bulbs to these very bright floodlight leds. Plugs directly into the factory housing but you can mount them anywhere you like. Comes with adhesive backing but there are many mounting options. These are the brightest and most effective leds I have found so you will not be dissappointed! Kit comes complete with instructions and leds for both footwells.Colors available are red,blue,green,white,orange.
Order here: http://www.shop.jwmotoring.com/produ...4&productId=29
Led door reflector kit swap:
Led door reflector kits; Send me your good door reflectors to be converted to a 9 led reflector kit. Intructions for sending the unit will be provided after sale. Kit comes complete with wiring harness to wire into the footwell lights so they come on when the doors are opened or the interior lights come on. Wiring harness also has extra connections for optional "puddle" led strips on the bottom of the door. Reflectors only work with red but the puddle lights can be any color. Door panel and courtesy light panel removal required for wiring. Complete instructions included. Covers both doors.
Order here: http://www.shop.jwmotoring.com/produ...4&productId=30
Let me know
#64
Melting Slicks
#66
Melting Slicks
#71
Drifting
Hey Steve, Happy New Year!
When I pulled power for mine I used the footwell circuit and pulled a line thru the door boot.
Basically just spiced to a 194 pigtail adapter plugged into the footwell light socket instead of the incandescent bulb, simple.
I also added a connection for the door reflector LED mod while I was inside the door.
HTH
#72
Melting Slicks
Hey Steve, Happy New Year!
When I pulled power for mine I used the footwell circuit and pulled a line thru the door boot.
Basically just spiced to a 194 pigtail adapter plugged into the footwell light socket instead of the incandescent bulb, simple.
I also added a connection for the door reflector LED mod while I was inside the door.
HTH
When I pulled power for mine I used the footwell circuit and pulled a line thru the door boot.
Basically just spiced to a 194 pigtail adapter plugged into the footwell light socket instead of the incandescent bulb, simple.
I also added a connection for the door reflector LED mod while I was inside the door.
HTH
#73
Drifting
#74
Le Mans Master
Member Since: May 2006
Location: DuBois PA
Posts: 5,987
Likes: 0
Received 18 Likes
on
16 Posts
St. Jude Donor '11-'12-'13-'14-'15
I did the same thing... Run decent gauge stranded wire like 16 guauge through the accordian so you can tap that circuit for any other lighting mods in Doors for the future.
Make life a little easier on yourself and get a 194 adaptor that has a pigtail on it. It plugs into the socket for the OEM footwell bulb and has wires coming out of it that you can easily terminate to. I wired my Door Reflectors, Outer Door Handles and Footwell LED strips to them... Next will be the Puddle Lights once I get off my lazy **** and get around to ordering the strips...
Tim
Make life a little easier on yourself and get a 194 adaptor that has a pigtail on it. It plugs into the socket for the OEM footwell bulb and has wires coming out of it that you can easily terminate to. I wired my Door Reflectors, Outer Door Handles and Footwell LED strips to them... Next will be the Puddle Lights once I get off my lazy **** and get around to ordering the strips...
Tim
#76
Drifting
Finally got these wired...
JW, thought you might like these pics...
Here's the Clear Corner with LED installed...
DRL's and amber LED...
Switchback white and running lights...
Matching coves with special double LED blinker/running light skunkwerks combo...
Here's the Clear Corner with LED installed...
DRL's and amber LED...
Switchback white and running lights...
Matching coves with special double LED blinker/running light skunkwerks combo...
#79
Drifting
Thanks JW!
Bradda T,
I haven't gotten past this test fit stage.
I over-ground the first one I did,
I'm waiting on another set in order to have a few extras to mess with.
Getting the depth correct is a challenge, without a table router.
I have an extra Halo taillamp that I'm using to test fit to.
I was thinking of designing a spacer/adapter held by the mount screws, so I could swap back and forth...
...but I've been busy with another project.
edit* I think they'll look great when I get them done T! Thanks for everything!!
Bradda T,
I haven't gotten past this test fit stage.
I over-ground the first one I did,
I'm waiting on another set in order to have a few extras to mess with.
Getting the depth correct is a challenge, without a table router.
I have an extra Halo taillamp that I'm using to test fit to.
I was thinking of designing a spacer/adapter held by the mount screws, so I could swap back and forth...
...but I've been busy with another project.
edit* I think they'll look great when I get them done T! Thanks for everything!!
Last edited by mtndv8; 01-08-2010 at 11:09 AM.
#80
Le Mans Master
Member Since: May 2006
Location: DuBois PA
Posts: 5,987
Likes: 0
Received 18 Likes
on
16 Posts
St. Jude Donor '11-'12-'13-'14-'15
Hey not a bad idea about the adaptor plate with a EPDM seal!!!!!! Let's do it!
Seriously... I haven't fallen in love with my clears but everyone else who sees em loves em... So if I can swap back and furth I'd be happier!
Tim
Seriously... I haven't fallen in love with my clears but everyone else who sees em loves em... So if I can swap back and furth I'd be happier!
Tim