Would you use these?
Banned Scam/Spammer
Joined: Jul 2006
Posts: 2,911
Likes: 10
From: Simi Valley CA
I don't see why not. The bowtie isn't going to do anything for/against the performance of the rotor.
I have 'auction site' drilled/slotted rotors on my Z and they've been fine. I've got about 4k miles on them and a couple of track events. I like the zinc plating.. always cleans up nice for shows. I think I paid < $150 for the set of 4.
I have 'auction site' drilled/slotted rotors on my Z and they've been fine. I've got about 4k miles on them and a couple of track events. I like the zinc plating.. always cleans up nice for shows. I think I paid < $150 for the set of 4.
Safety Car
Joined: Aug 2007
Posts: 4,506
Likes: 0
From: This is not a Song, It's an Outburst: Or, The Establishment Blues; Sixto Diaz Rodriguez
I like the bow-tie on them, and I like that they are dimpled, and not drilled. 
I'd use them, and what was mentioned, keep an eye on them. 
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
Melting Slicks
Joined: Apr 2008
Posts: 2,343
Likes: 9
From: Lexington Park MD
Those are the Edge Performance Rotors that I believe were sold by BSI Brakes. I have a set and I can't complain. They work just fine on my DD. I don't have the bowties, mine are drilled and slotted. Feel free to PM me if you have any specific questions about them.
I believe some forum members got screwed by them. They ran a very good price on rotors and pads but went out of business very soon after, so not all of the orders were filled. There used to be a sticky at the top of one of the C5 sections concerning them.
I believe some forum members got screwed by them. They ran a very good price on rotors and pads but went out of business very soon after, so not all of the orders were filled. There used to be a sticky at the top of one of the C5 sections concerning them.
Race Director
Joined: Jan 2002
Posts: 19,557
Likes: 1,470
From: I love you & miss you Linda
2017 C7 of the Year Finalist
St. Jude Contributor
Safety Car
Joined: Aug 2007
Posts: 4,506
Likes: 0
From: This is not a Song, It's an Outburst: Or, The Establishment Blues; Sixto Diaz Rodriguez
I thought that was the "zinc plated" look. 
Le Mans Master
Joined: Feb 2002
Posts: 6,937
Likes: 21
From: Waldorf MD
Those are the Edge Performance Rotors that I believe were sold by BSI Brakes. I have a set and I can't complain. They work just fine on my DD. I don't have the bowties, mine are drilled and slotted. Feel free to PM me if you have any specific questions about them.
I believe some forum members got screwed by them. They ran a very good price on rotors and pads but went out of business very soon after, so not all of the orders were filled. There used to be a sticky at the top of one of the C5 sections concerning them.
I believe some forum members got screwed by them. They ran a very good price on rotors and pads but went out of business very soon after, so not all of the orders were filled. There used to be a sticky at the top of one of the C5 sections concerning them.
I also got the Edge Performance Rotors that were sold by BSI Brakes. I got drilled and slotted with HAWK HPS pads for about $350. They are also cryogenically treated as well as zinc plated. They are GREAT brakes ! Still look brand new and stop well.Last edited by Oldvetter; Aug 22, 2009 at 12:29 PM.
Melting Slicks
Joined: Mar 2005
Posts: 2,891
Likes: 4
From: North Port Fl
I bought a set of them from BSI. I painted the hats black. I have not mounted them yet because I only have 5k on the brakes I have now.
If I recall correctly, they were supposed to be made in USA, zinc coated and Cryogenically treated. You got a deal on the rotors. I paid $200 for the 4.
If I recall correctly, they were supposed to be made in USA, zinc coated and Cryogenically treated. You got a deal on the rotors. I paid $200 for the 4.
Last edited by ljthe2nd; Aug 22, 2009 at 12:10 PM.