Does your Vette Have This???
Race Director
Joined: Jul 2007
Posts: 11,467
Likes: 8
From: 972 and 405
Le Mans Master
Joined: Feb 2009
Posts: 5,253
Likes: 9
From: Northwest CT
Le Mans Master
Joined: Jun 2006
Posts: 6,478
Likes: 20
From: guthrie oklahoma
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
Race Director
Joined: Jul 2007
Posts: 11,467
Likes: 8
From: 972 and 405
Actually every part on the car should be covered in emblems and "Corvette" script. Why stop at what GM left available? The following parts should also be covered:
Exterior-
Front Fenders
Doors
Rockers
Rear Fenders
Rear Bumper
Targa
B-Pillar
Windshield
Hood
Windows (etched in)
Rear hatch should have an enormous Corvette emblem on it.
Side mirrors
Tires
Headlights should have a shroud around the front so that when you turn them on, there is a "Corvette" that is cut out of the light beam
The weatherstripping should also have crossflags all over
Interior-
The headliner should have a huge emblem under the targa
The buttons on the radio and HVAC should have little emblems on them
The door panels should also have two emblems on them, for the lower and upper half
The shift **** should have an emblem on the top of it
The knee bolsters should have the script on them
The floor mats should have both the script and emblem
Engine bay-
All caps should have the emblem
he oil dipstick should have the script printed over and over on it
All hoses should have a wrapper with small pics of the emblem
Chassis-
The sway bars should have the script along the entire bar
All bushings should have the emblem
The leaf springs should be covered in the script
The brake rotors should have cutouts of the emblem instead of being drilled
The insides of the exhaust pipes should also be scripted
-Alex
Exterior-
Front Fenders
Doors
Rockers
Rear Fenders
Rear Bumper
Targa
B-Pillar
Windshield
Hood
Windows (etched in)
Rear hatch should have an enormous Corvette emblem on it.
Side mirrors
Tires
Headlights should have a shroud around the front so that when you turn them on, there is a "Corvette" that is cut out of the light beam
The weatherstripping should also have crossflags all over
Interior-
The headliner should have a huge emblem under the targa
The buttons on the radio and HVAC should have little emblems on them
The door panels should also have two emblems on them, for the lower and upper half
The shift **** should have an emblem on the top of it
The knee bolsters should have the script on them
The floor mats should have both the script and emblem
Engine bay-
All caps should have the emblem
he oil dipstick should have the script printed over and over on it
All hoses should have a wrapper with small pics of the emblem
Chassis-
The sway bars should have the script along the entire bar
All bushings should have the emblem
The leaf springs should be covered in the script
The brake rotors should have cutouts of the emblem instead of being drilled
The insides of the exhaust pipes should also be scripted
-Alex
Le Mans Master
Joined: Oct 2005
Posts: 7,288
Likes: 443
From: Texas Where God intended me to be.
2023 Corvette of the Year Finalist - Unmodified
2022 C5 of the Year Winner - Unmodified
Cruise-In X Veteran
St. Jude Donor '08 thru '11,'22 thru '26
I thought that was a mandatory mod right after the floor mats 
Team Owner
Joined: Jul 2006
Posts: 97,155
Likes: 1,471
From: Calgary, AB. There's a reason why white was the only color offered on every year Corvette. Proud Canadian German Jamaican!
St. Jude Donor '09, '12-'13-'14-'15-'16-'17
Only 4 places on the inside of mine, middle of the tach and speedo, center of the steering wheel and one on the waterfall.
Melting Slicks
Joined: May 2006
Posts: 2,417
Likes: 1
From: No place to legally ride ATV's NJ
Actually every part on the car should be covered in emblems and "Corvette" script. Why stop at what GM left available? The following parts should also be covered:
Exterior-
Front Fenders
Doors
Rockers
Rear Fenders
Rear Bumper
Targa
B-Pillar
Windshield
Hood
Windows (etched in)
Rear hatch should have an enormous Corvette emblem on it.
Side mirrors
Tires
Headlights should have a shroud around the front so that when you turn them on, there is a "Corvette" that is cut out of the light beam
The weatherstripping should also have crossflags all over
Interior-
The headliner should have a huge emblem under the targa
The buttons on the radio and HVAC should have little emblems on them
The door panels should also have two emblems on them, for the lower and upper half
The shift **** should have an emblem on the top of it
The knee bolsters should have the script on them
The floor mats should have both the script and emblem
Engine bay-
All caps should have the emblem
he oil dipstick should have the script printed over and over on it
All hoses should have a wrapper with small pics of the emblem
Chassis-
The sway bars should have the script along the entire bar
All bushings should have the emblem
The leaf springs should be covered in the script
The brake rotors should have cutouts of the emblem instead of being drilled
The insides of the exhaust pipes should also be scripted
-Alex
Exterior-
Front Fenders
Doors
Rockers
Rear Fenders
Rear Bumper
Targa
B-Pillar
Windshield
Hood
Windows (etched in)
Rear hatch should have an enormous Corvette emblem on it.
Side mirrors
Tires
Headlights should have a shroud around the front so that when you turn them on, there is a "Corvette" that is cut out of the light beam
The weatherstripping should also have crossflags all over
Interior-
The headliner should have a huge emblem under the targa
The buttons on the radio and HVAC should have little emblems on them
The door panels should also have two emblems on them, for the lower and upper half
The shift **** should have an emblem on the top of it
The knee bolsters should have the script on them
The floor mats should have both the script and emblem
Engine bay-
All caps should have the emblem
he oil dipstick should have the script printed over and over on it
All hoses should have a wrapper with small pics of the emblem
Chassis-
The sway bars should have the script along the entire bar
All bushings should have the emblem
The leaf springs should be covered in the script
The brake rotors should have cutouts of the emblem instead of being drilled
The insides of the exhaust pipes should also be scripted
-Alex
You forgot a large emblem for the fuel door! 
Team Owner
Joined: May 1999
Posts: 22,830
Likes: 13
From: Columbus Ohio
CI 3-4, 8-9-10 Veteran
St. Jude Donor '06-'08-'10
