rear overlay installed
Melting Slicks
Joined: Oct 1999
Posts: 2,501
Likes: 177
From: Houston, Texas FEAR THE BONES
2023 C5 of the Year Finalist - Modified
Tech Contributor
Joined: Aug 1999
Posts: 16,376
Likes: 404
From: Should this thoughtful, valuable contribution meet with no acknowledgement or 'thanks' this post----
I have talked to the owner of my company and we are going to fit my corvette with the vinyl for my vette. sorta the test pilot and we can make different colors as well so if enough people are interested in buying it if it works out ok then i have also discussed with the owner of becoming a vendor on here to sell it cut to fit but it has to be enough interest in it to do it toget vendor status and if not hey i got mine done for free !!!! 
Le Mans Master
Joined: Dec 2005
Posts: 6,460
Likes: 16
From: hamilton alabama
That sounds cool. One thing about the earlier ones you may not be aware of, it came as 3 pieces; a left, a right, and a piece for over the pipes....also, the vents were long thin strips of vinyl just for that area...the whole thing was kind of hoaky, and that is why it was so hard to deal with. If you can figure a way to make it no more than 2 pieces I think it would be a hit. And in different colors it is the bomb!
i think we can get it done in 1 piece
Tech Contributor
Joined: Aug 1999
Posts: 16,376
Likes: 404
From: Should this thoughtful, valuable contribution meet with no acknowledgement or 'thanks' this post----
Le Mans Master
Joined: Sep 2007
Posts: 7,604
Likes: 8
From: Belleville Il
That would be very interesting,,especially if it was in the busted budget range!! $400 is beyond insane IMO for a piece of plastic!! I know there are development and tooling cost,,but material cost should be next to nothing!! Hopefully vinyl could actually be affordable!!There are a lot of us working class vet owners out there!!
Le Mans Master
Joined: Dec 2005
Posts: 6,460
Likes: 16
From: hamilton alabama
That would be very interesting,,especially if it was in the busted budget range!! $400 is beyond insane IMO for a piece of plastic!! I know there are development and tooling cost,,but material cost should be next to nothing!! Hopefully vinyl could actually be affordable!!There are a lot of us working class vet owners out there!!
i am sure we should be able to do it in a 1 piece vinyl and using my corvette to get the specs and then getting the deisgners to get a file for it is the hard part i am thinking.once it is perfcted in the right size then it should fit all C5s. it should be very doable and affordable.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Oct 1999
Posts: 2,501
Likes: 177
From: Houston, Texas FEAR THE BONES
2023 C5 of the Year Finalist - Modified
--> VFA-103 
