A "Whats it worth" thread; engine.
Thread Starter
Race Director
Joined: Feb 2008
Posts: 19,691
Likes: 322
From: Alexandria VA
A "Whats it worth" thread; engine.
Specs are as follows, what would you pay?
2005 LS2 block, only 5,000 miles on the new build, never finished tuning
Harland Sharp 1.7 Rockers
Comp 921 Springs
Stainless Steel Valves matched to the heads
Custom blower cam
Forged Callies rods/pistons, dished to drop CR to about 9.5:1 (for more torque)
Mahle piston rings, filed and matched to the bore
Double Roller adjustable timing chain
SLP Heavy Duty High Flow oil pump
ARP head studs
ARP main bolts
(pretty much ARP everything where stress is involved)
Hardened Pushrods
Magnacharger MP112 5th gen S/C, 1:1 Corvette drive pullies in the rear
2.7" front pulley 8 rib
ECS 8-rib kit, entire setup
New-gen siemens deka 63# injectors
2005 LS2 block, only 5,000 miles on the new build, never finished tuning
Harland Sharp 1.7 Rockers
Comp 921 Springs
Stainless Steel Valves matched to the heads
Custom blower cam
Forged Callies rods/pistons, dished to drop CR to about 9.5:1 (for more torque)
Mahle piston rings, filed and matched to the bore
Double Roller adjustable timing chain
SLP Heavy Duty High Flow oil pump
ARP head studs
ARP main bolts
(pretty much ARP everything where stress is involved)
Hardened Pushrods
Magnacharger MP112 5th gen S/C, 1:1 Corvette drive pullies in the rear
2.7" front pulley 8 rib
ECS 8-rib kit, entire setup
New-gen siemens deka 63# injectors
