[Z06] Need Input On My Heads!!!!
Thread Starter
Instructor
Joined: Sep 2007
Posts: 123
Likes: 0
Need Input On My Heads!!!!
I have 853 Ls1 Heads With 2.02/1.57 Valves,I am Looking on getting the G5x3 114 lsa. The Heads have Been Just surfaced Just enough to have them clean... Does anyone know if these Heads Will have enough clearance?? I am going to clay them and check for clearnce but if anyone has ran into this Set up and would save me A LOT of TIME it would really be helpful...
