[Z06] Need help please
Thread Starter
Burning Brakes
Joined: Mar 2010
Posts: 761
Likes: 2
From: sf bay CA
Need help please
Ok, so on saturday I installed a hurricane cai and a new powerduct. Install went smoothly. I have since driven about 200 miles problem free. But just an hour ago, as I'm leaving the gym it starts acting very obviously weird. As I start to roll out in first gear it keeps feeling like it's going to die on me. It noticeably shakes and surges a little and almost turns off. A couple miles later, as I'm getting home the check engine light turns on. What can it be?? I looked under the hood and everything is connected fine.
Alex
Alex
Team Owner
Joined: Dec 2008
Posts: 35,874
Likes: 1,600
From: Honolulu HI
Ok, so on saturday I installed a hurricane cai and a new powerduct. Install went smoothly. I have since driven about 200 miles problem free. But just an hour ago, as I'm leaving the gym it starts acting very obviously weird. As I start to roll out in first gear it keeps feeling like it's going to die on me. It noticeably shakes and surges a little and almost turns off. A couple miles later, as I'm getting home the check engine light turns on. What can it be?? I looked under the hood and everything is connected fine.
Alex
Alex
Racer
Joined: Nov 2009
Posts: 488
Likes: 0
From: Corpus Christi Texas
Pull your codes on the DIC. you might be getting the lean codes (I forget what they are at the moment, but search here for em). Installing Halltech's honeycomb air straightener on the MAF could take care of the turbulent airflow that causes lean codes.
Also, as MTPZ06 said, check all connections for possible leaks.
Also, as MTPZ06 said, check all connections for possible leaks.
with the above post about air leaks, happens all the time witha new cai. after ome mileage, clamps sometimes come loose.
Thread Starter
Burning Brakes
Joined: Mar 2010
Posts: 761
Likes: 2
From: sf bay CA
