A Few Mods
#1
Le Mans Master
Thread Starter
A Few Mods
Well I finally got my new ACI front splitter painted and installed along with some new engine bling.
I went a little different than most do with the splitter. I decided not to have it painted to match the body, but instead I went with a matte black. It looks a little more aggressive and more like what you see on the ZR1. I know some will think it should be matching, but I like it. Besides I was able to do it in my garage with a few rattle cans of DupliColor.
I also added some new bling to the engine bay.
Here are a few pictures of the new splitter first showing the test fit prior to painting, then the completed project.
Here are a few shots of the before engine bay.
After the bling is added.
For those that wanted the complete car view here are a few I just took.
I went a little different than most do with the splitter. I decided not to have it painted to match the body, but instead I went with a matte black. It looks a little more aggressive and more like what you see on the ZR1. I know some will think it should be matching, but I like it. Besides I was able to do it in my garage with a few rattle cans of DupliColor.
I also added some new bling to the engine bay.
Here are a few pictures of the new splitter first showing the test fit prior to painting, then the completed project.
Here are a few shots of the before engine bay.
After the bling is added.
For those that wanted the complete car view here are a few I just took.
Last edited by BWF07; 04-28-2010 at 02:41 PM. Reason: Added pictures of Complete car
#5
Team Owner
Member Since: Mar 2004
Location: Oklahoma City OK
Posts: 58,259
Received 1,675 Likes
on
1,298 Posts
C6 of Year Finalist (appearance mods) 2019
Very nice!
#6
Le Mans Master
Thread Starter
Thanks for the comments.
Last edited by BWF07; 04-28-2010 at 11:08 AM.
#7
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,940
Received 19,293 Likes
on
13,966 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
The front splitter looks fine in black - plus you didn't spend a fortune on painting it so when it gets chipped, you can just reshoot it with the spray paint.
Nice looking engine bay too.
Nice looking engine bay too.
#9
Instructor
Member Since: Apr 2010
Location: Saginaw Michigan
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
I probably would have done the same thing, since i have a torch red with black interior. It just looks like it flows really well together! Great Job! To complement that, have you thought of painting the bottom portion of the rear end down by the exhaust and grilles, or whatever you call them, to match, like i have seen others do on here? Blacking out the DTR lamps would set it off also.
Last edited by JWAddington; 04-28-2010 at 11:42 AM.
#10
Le Mans Master
Thread Starter
I probably would have done the same thing, since i have a torch red with black interior. It just looks like it flows really well together! Great Job! To complement that, have you thought of painting the bottom portion of the rear end down by the exhaust and grilles, or whatever you call them, to match, like i have seen others do on here? Blacking out the DTR lamps would set it off also.
#13
Melting Slicks
Member Since: Nov 2007
Location: DeRidder LA
Posts: 2,595
Received 334 Likes
on
177 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16-'17-‘18-'19-'20-'21-'22-'23-'24
TR6speed the car looks bad *** for sure !!
#16
Burning Brakes
Member Since: Apr 2010
Location: Spring Hill TN
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Looks better black anyways good job.... ever consider doing the rear lower bumper blackout to tie it in together...black accents always look so good on TR and MY cars
#17
Le Mans Master
Thread Starter
Actually I was hoping to get that done as well while doing these additions. I have all the material I need, just ran out of time maybe in a week or two. I am in the process of a kitchen remodel and all new hardwood flooring. The Kitchen I just finished a few days ago, I am getting ready to start the flooring, so the vette projects will go back on the back burner. Will post pictures when done.
#18
Burning Brakes
Member Since: Apr 2010
Location: Spring Hill TN
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Actually I was hoping to get that done as well while doing these additions. I have all the material I need, just ran out of time maybe in a week or two. I am in the process of a kitchen remodel and all new hardwood flooring. The Kitchen I just finished a few days ago, I am getting ready to start the flooring, so the vette projects will go back on the back burner. Will post pictures when done.
#20
Race Director
Member Since: Jul 2008
Location: The Sunshine State
Posts: 16,999
Received 2,680 Likes
on
1,482 Posts
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
C7 of the Year - Modified Finalist 2021
Finalist 2020 C7 of the Year -- Modified
2020 C5 of the Year Finalist - Modified
C5 of Year Finalist (appearance mods) 2019
2018 C5 of Year Finalist
Also, when installing the front splitter, the OEM flex spoiler is removed correct? Love the look, however I know I would tear that up just backing out of my driveway.
Last edited by MSG C5; 04-28-2010 at 06:52 PM.