Interior makeover
Advanced
Joined: May 2010
Posts: 87
Likes: 0
From: Kansas
To each their own
That and the heated seat switches on the AHC - simple and clean.
Nicely done!!!
Pro
Joined: Mar 2009
Posts: 648
Likes: 1
From: South Jersey
Really like your interior, looks unique and pretty well thought out. The cf looks fine in your car but curious if you forgot or have plans to cf the AH panel as Dennis of DD Mods did in his car. I think it would flow better.
I was going to ask you why you choose red instead of yellow for the corvette name on the seats and console but you already answered that. The corvette name on the console is not really obtrusive on yours, you should see the one Chris did for mine, if you want large.
So are you just about done with the interior, it looks pretty finished to me but I thought I was done with mine a few months ago as well.
Jerry
I was going to ask you why you choose red instead of yellow for the corvette name on the seats and console but you already answered that. The corvette name on the console is not really obtrusive on yours, you should see the one Chris did for mine, if you want large.
So are you just about done with the interior, it looks pretty finished to me but I thought I was done with mine a few months ago as well.
Jerry
Thread Starter
Racer
Joined: Jul 2007
Posts: 444
Likes: 4
From: Waynesboro VA
Really like your interior, looks unique and pretty well thought out. The cf looks fine in your car but curious if you forgot or have plans to cf the AH panel as Dennis of DD Mods did in his car. I think it would flow better.
I was going to ask you why you choose red instead of yellow for the corvette name on the seats and console but you already answered that. The corvette name on the console is not really obtrusive on yours, you should see the one Chris did for mine, if you want large.
So are you just about done with the interior, it looks pretty finished to me but I thought I was done with mine a few months ago as well.
Jerry
I was going to ask you why you choose red instead of yellow for the corvette name on the seats and console but you already answered that. The corvette name on the console is not really obtrusive on yours, you should see the one Chris did for mine, if you want large.
So are you just about done with the interior, it looks pretty finished to me but I thought I was done with mine a few months ago as well.
Jerry
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Racer
Joined: Jul 2007
Posts: 444
Likes: 4
From: Waynesboro VA
It is an Avic z1 upgraded to a z3. I found it listed on eBay from a person that lives just across town from me. I contacted him and made the deal outside of eBay. If I were to buy a new unit, I would contact Dennis at DoubleD Mods as he can get you a complete set up to install the unit. If you have basic mechanical skills and can read a wiring diagram, you should be able to do this with no problem. It does have a lot of wires and looks intimidating but with all the information about this on the forum and some patients, you can get it done.
