EBCM Fried
Pro
Joined: Jun 2008
Posts: 509
Likes: 0
From: The Ham AL
question: i had the 1214 code "repaired" (NOT by ABSFIXER). got my EBCM back and it worked fine for about a week. then the lights and messages came back on in the DIC. started throwing all sorts of EBCM codes with the "c" designation. couldnt do anything about it at the time, and now I just get "no comm"... i was told that one of the codes i received previously was one of the "terminal" codes, and that the module would have to be replaced. But if that was the case, why would it now be "no comm"? something else has obviously changed, and i'm skeptical of replacing such an expensive part if it isnt required... any help would be appreciated.
Drifting
Joined: Aug 2006
Posts: 1,694
Likes: 0
From: Oregon
Im no expert but, Bill Curlee and 8VETTE7 are the guys with ALL the right answers! Hopefully, one will chime in. Both have answered my questions with the right answers!
After reading hundreds of posts today since we had rain, my guess would be a possible ground problem, but like I said, Im not an expert. Best of luck!
This is the BEST forum on Corvettes!
After reading hundreds of posts today since we had rain, my guess would be a possible ground problem, but like I said, Im not an expert. Best of luck!
This is the BEST forum on Corvettes!
