Notices
C5 General General C5 Corvette and C5 Z06 Discussion not covered in Tech

Perfect stocking stuffer!

Thread Tools
 
Search this Thread
 
Old Dec 14, 2010 | 04:46 PM
  #1  
SacCityCorvette's Avatar
SacCityCorvette
Thread Starter
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2010
Posts: 7,468
Likes: 135
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
Default Perfect stocking stuffer!

Merry Christmas Everyone!

Get your C5 or C6 Corvette a pair of Fangs for Christmas!
Here’s your chance to get the ultimate Lower Radiator/ Skid Plate Protection at a super low price during our Christmas sale!
The Fangs are made of a High Impact Superior Performance Plastic. The Fangs are extremely impact resistant and 6 times more abrasion resistant than steel. Fangs eliminate the friction that causes breakage of the lower radiator support, especially on the aluminum C6 support. Installation only takes a few minutes. Being only 1/8" thick you will not even notice any ground clearance loss. The Fangs give you complete front to back protection so no matter where you scrape your skid bar you are protected. If you scrape, there is none of that horrible metal noise. If you accidentally bump up on a parking curb you will notice the front of your Vette lifting up as it smoothly slides up and smoothly back down when you reverse. When you consider that it cost around $600 to replace the Skid plate/Lower radiator support, Fangs are a small price to pay to reduce the chance of damaging or breaking your Lower Radiator/ Skid Plate. The Fangs are the best Lower Radiator/ Skid Plate protection available!

The benefits of installing Fangs:

1. No noticeable ground clearance loss.
2. Allows your skid plates to slide instead of denting or getting scraped up.
3. Helps prevent breakage of the lower radiator support, especially on the C6 with its aluminum Support that is prone to breakage.
4. Beautifies skid plates that are already scraped up and keeps them looking good.
5. Protects the whole skid plate not just part of it.
6. Keeps impact centered on the skid plate where it is strongest so there is no side loading of the skid plate where it is weak.
7. No more scraping sound when you do scrape.
8. Only weigh 5 ounces for you weight conscious Vette owners.
9. Simple 15-20 minute install.
10. No modification required for the C5 installation.
11. C6 only requires 4 small holes to install. Drill bit is supplied.
12. Customer Satisfaction warranty!
13. The very best protection available!

Even at the regular price of C5 Fangs $54.95 and C6 Fangs for $49.95 the Fangs are worth it for such great protection that they deliver.
But for our Super Christmas Special, your choice, C5 or C6 are only $39.99! Includes free shipping to the lower 48 and Hawaii!

Here is a link to a couple videos of us abusing a pair of white Fangs. As you will see they can take it! http://www.saccitycorvette.com/See-t...n-Action-.html

C6 Fangs information and where to purchase.
http://www.saccitycorvette.com/C6-Fangs.html

C5 Fangs information and where to purchase.
http://www.saccitycorvette.com/Fangs.html
Attached Images      
__________________
Don't forget to check out our products at www.saccitycorvette.com

If you like our products, tell others! If not, tell us!











Reply
Old Dec 16, 2010 | 05:14 PM
  #2  
SacCityCorvette's Avatar
SacCityCorvette
Thread Starter
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2010
Posts: 7,468
Likes: 135
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
Default

Merry Christmas!
And thank you to everyone that purchased Fangs!
Please let our fellow Vette owners know how you like them!

Last edited by SacCityCorvette; Dec 16, 2010 at 05:18 PM.
Reply
Old Dec 20, 2010 | 02:54 PM
  #3  
SacCityCorvette's Avatar
SacCityCorvette
Thread Starter
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2010
Posts: 7,468
Likes: 135
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
Default

Bump for the Christmas season!

Last edited by SacCityCorvette; Dec 20, 2010 at 04:35 PM.
Reply
Old Dec 20, 2010 | 03:22 PM
  #4  
teebee's Avatar
teebee
Safety Car
20 Year Member
Photoriffic
Liked
Loved
 
Joined: Aug 2004
Posts: 4,907
Likes: 731
From: Southwest Kansas
2022 Corvette of the Year Finalist -- Unmodified
2021 C6 of the Year Winner - Unmodified
Default

I just bought a set.
Reply
Old Dec 20, 2010 | 04:39 PM
  #5  
SacCityCorvette's Avatar
SacCityCorvette
Thread Starter
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2010
Posts: 7,468
Likes: 135
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
Default

Originally Posted by teebee
I just bought a set.

Thanks teebee! We appreciate it and they are on the way!
Let us know how you like them!


Merry Christmas!
Reply
Old Dec 20, 2010 | 05:43 PM
  #6  
BUGZ's Avatar
BUGZ
Drifting
Supporting Member
 
Joined: Oct 2007
Posts: 1,673
Likes: 2
From: Titusville FL
Default Fat Daddys

I already have the roller type / Fat Daddy installed on the radiator support. Will the Fangs still mount ok?

Thanks

BUGZ
Reply
Old Dec 24, 2010 | 02:07 PM
  #7  
teebee's Avatar
teebee
Safety Car
20 Year Member
Photoriffic
Liked
Loved
 
Joined: Aug 2004
Posts: 4,907
Likes: 731
From: Southwest Kansas
2022 Corvette of the Year Finalist -- Unmodified
2021 C6 of the Year Winner - Unmodified
Default

Mine came today and I have them installed already. Took me about 15 minutes.
Reply
Old Dec 24, 2010 | 06:44 PM
  #8  
Z06supercharged's Avatar
Z06supercharged
Drifting
 
Joined: Sep 2008
Posts: 1,389
Likes: 3
From: somewhere shooting my assault rifles
Default

Got my fangs on...

I had wheels all this time thinking I needed them going in/out of my driveway the way front always lifted up rolling on them turning in and out and different angles trying not to scrape. Today did the driveway test many times and not once did the fangs scrape. The wheels hung low enough below cradle support to hit them all the time.

Last edited by Z06supercharged; Dec 24, 2010 at 11:14 PM.
Reply
Corvette Stories

The Best of Corvette for Corvette Enthusiasts

story-0

Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!

 Joe Kucinski
story-1

150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter

 Joe Kucinski
story-2

8 Coolest Corvette Pace Cars (and Replicas) of All Time

 Verdad Gallardo
story-3

Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)

 Joe Kucinski
story-4

Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!

 Verdad Gallardo
story-5

Top 10 Corvettes Coming to Mecum Indy 2026!

 Brett Foote
story-6

Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!

 Michael S. Palmer
story-7

10 Revolutionary 'Corvette Firsts' Most People Don't Know

 Joe Kucinski
story-8

5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2

 Michael S. Palmer
story-9

2027 Corvette vs The World: Every C8 vs Its Closest Competitor

 Joe Kucinski
Old Dec 24, 2010 | 08:35 PM
  #9  
dobewillie's Avatar
dobewillie
Race Director
 
Joined: Mar 2006
Posts: 10,477
Likes: 4
From: lockport n.y
Default

Cool product
Reply
Old Dec 24, 2010 | 08:44 PM
  #10  
tom_c5's Avatar
tom_c5
Racer
15 Year Member
Conversation Starter
All Eyes On Me
 
Joined: May 2008
Posts: 285
Likes: 0
From: Reno, Nevada
Default

Yep, I just bought a set and installed without any issues. My skid bars were fairly beat up and with the Fangs it looks much better. Haven't had the chance to test 'em out yet.
Reply
Old Dec 26, 2010 | 12:08 AM
  #11  
SacCityCorvette's Avatar
SacCityCorvette
Thread Starter
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2010
Posts: 7,468
Likes: 135
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
Default

Originally Posted by BUGZ
I already have the roller type / Fat Daddy installed on the radiator support. Will the Fangs still mount ok?

Thanks

BUGZ
Hi BUGZ,
You will not need wheels if you install the Fangs. You will also get more ground clearance.

Get them before the Christmas sale is over!
Reply
Old Dec 26, 2010 | 01:59 AM
  #12  
JuicedZ's Avatar
JuicedZ
Racer
15 Year Member
Liked
 
Joined: Aug 2005
Posts: 436
Likes: 1
From: Tulsa Oklahoma
Default

Just ordered white fangs. Thanks!
Reply
Old Dec 27, 2010 | 12:34 AM
  #13  
SacCityCorvette's Avatar
SacCityCorvette
Thread Starter
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2010
Posts: 7,468
Likes: 135
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
Default

Originally Posted by JuicedZ
Just ordered white fangs. Thanks!
Thanks you JuicedZ! We appreciate it!
Reply
Old Dec 27, 2010 | 12:36 AM
  #14  
SacCityCorvette's Avatar
SacCityCorvette
Thread Starter
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2010
Posts: 7,468
Likes: 135
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
Default

Hurry! Our Christmas sale is almost over!

Don't miss out on a great money saving sale!

Here's a link to our Christmas Sale!
http://forums.corvetteforum.com/c5-p...g-stuffer.html
Reply
Old Dec 27, 2010 | 10:01 AM
  #15  
benjiusn's Avatar
benjiusn
Instructor
15 Year Member
All Eyes On Me
 
Joined: Aug 2008
Posts: 207
Likes: 0
From: San Antonio, TX
Default

Just placed an order!
Reply
Old Dec 29, 2010 | 04:06 AM
  #16  
SacCityCorvette's Avatar
SacCityCorvette
Thread Starter
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2010
Posts: 7,468
Likes: 135
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
Default

Originally Posted by benjiusn
Just placed an order!
Thanks benjiusn, we appreciate it!
Reply
Old Dec 29, 2010 | 04:15 AM
  #17  
SacCityCorvette's Avatar
SacCityCorvette
Thread Starter
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2010
Posts: 7,468
Likes: 135
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
Default

Hi Everyone,
Don't miss out on this great price on C5 and C6 Fangs!
Sale ends on the 1st.


Happy New Year!
Reply
Old Dec 30, 2010 | 07:55 PM
  #18  
ZFLASH's Avatar
ZFLASH
Melting Slicks
15 Year Member
Photogenic
Liked
Top Answer: 1
 
Joined: Apr 2010
Posts: 2,194
Likes: 146
From: Houston Republic of Texas
St. Jude Donor '10-'11-'12-'13-'14, '16
Default

Just got mine in today,thanks guys! Now trying to decide to get the radiator screen to go with them. Just got a new one last week.
Reply
Old Jan 4, 2011 | 01:56 PM
  #19  
SacCityCorvette's Avatar
SacCityCorvette
Thread Starter
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2010
Posts: 7,468
Likes: 135
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
Default

Thank you Everyone for purchasing Fangs during the Christmas sale, we really appreciate it!

Please let your fellow forum member know what you think of them.
Reply

Get notified of new replies

To Perfect stocking stuffer!





All times are GMT -4. The time now is 05:42 AM.

story-0
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!

Slideshow: The 10 most explosive Corvettes ever built based on power-to-weight ratio.

By Joe Kucinski | 2026-05-20 07:23:03


VIEW MORE
story-1
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter

Slideshow: From C1 to C8 we compare every Corvette generation by the numbers.

By Joe Kucinski | 2026-05-12 16:54:12


VIEW MORE
story-2
8 Coolest Corvette Pace Cars (and Replicas) of All Time

Slideshow: Some Corvette pace cars became collectible legends, while others perfectly captured the look and attitude of their era.

By Verdad Gallardo | 2026-05-11 09:50:51


VIEW MORE
story-3
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)

Slideshow: Ranking the top 10 Corvette engines by torque output.

By Joe Kucinski | 2026-05-05 11:58:09


VIEW MORE
story-4
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!

Slideshow: A Corvette pace car nearly matching IndyCar speeds sounds exaggerated, until you look at the numbers.

By Verdad Gallardo | 2026-05-04 20:03:36


VIEW MORE
story-5
Top 10 Corvettes Coming to Mecum Indy 2026!

Among a rather large group of them.

By Brett Foote | 2026-05-04 13:56:44


VIEW MORE
story-6
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!

Slideshow: the top 10 things Corvette owners want in the C9 Corvette

By Michael S. Palmer | 2026-04-30 12:41:15


VIEW MORE
story-7
10 Revolutionary 'Corvette Firsts' Most People Don't Know

Slideshow: 10 Important Corvette 'firsts' that every fan should know.

By Joe Kucinski | 2026-04-29 17:02:16


VIEW MORE
story-8
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2

Slideshow: Should you buy a 2020-2026 Corvette or wait for 2027?

By Michael S. Palmer | 2026-04-22 10:08:58


VIEW MORE
story-9
2027 Corvette vs The World: Every C8 vs Its Closest Competitor

Slideshow: 2027 Corvette lineup vs the world.

By Joe Kucinski | 2026-04-24 16:12:42


VIEW MORE