Notices
C5 General General C5 Corvette and C5 Z06 Discussion not covered in Tech
Sponsored by:
Sponsored by:

Borla Stinger installed on Z06 (Merry Christmas to me!)

Thread Tools
 
Search this Thread
 
Old 12-30-2011, 12:40 AM
  #1  
YLO Z06
Melting Slicks
Thread Starter
 
YLO Z06's Avatar
 
Member Since: Oct 1999
Location: Houston, Texas FEAR THE BONES
Posts: 2,470
Received 151 Likes on 66 Posts
2023 C5 of the Year Finalist - Modified

Default Borla Stinger installed on Z06 (Merry Christmas to me!)

I snatched up a used Borla Stinger 2-tip exhaust from TPE (thanks Jennifer!) as a Christmas present to my Z06. The exhaust was a little rough, as it had been previously installed on a car with a Tigershark rear bumper and was missing a few of the pipes (just regular 2.5" pipe, not the mufflers, connectors or tips).

Over the Christmas break, I took the car to a local exhaust place to have them fab up some new connecting pipes and install the system. My car is lowered, and because of this I was turned away at two exhaust shops before the third one agreed to take the plunge and see if my car would make it up the ramp to the lift without tearing up the front spoiler or rocker panels. It fit, but barely .

The stock Ti exhaust came off fairly easily, but I was surprised that we had to remove the rear sway bar in order for the exhaust to come out. Those over-the-axle pipes are a weird angle. The Stingers did not come with any exhaust clamps, so we had to weld the pieces together, which necessitated some careful line up of the mufflers, pipes and tips to ensure the system would hang right and the tips would align out the back. The exhaust guy was really careful and took his time, which meant that the entire operation took longer than the 1.5 hours of labor they ended up charging me (more like 3 hours). The welds look really good, as well, and he took his time to ensure there would not be any exhaust leaks.

All said and done, I am extremely pleased with the purchase and install, and the sound from those pipes is out of this world . This is one of the best mods I have done to the Z, and would highly recommend the Stingers. I don't notice any drone in the higher gears on the highway, and I find myself waiting longer to shift gears just so I can hear the bark from the exhaust. Love the snap, crackle and pop on deceleration, as well.

Here are a few quick cell phone pics. The car is filthy from all the rain we have had lately. Better pics to come once the car gets washed.



Old 12-30-2011, 06:57 PM
  #2  
FYRARMS
Le Mans Master
 
FYRARMS's Avatar
 
Member Since: Jul 2007
Location: Oswego IL
Posts: 5,999
Received 3,250 Likes on 1,592 Posts

Default

Love the Borlas! Nice deep and hollow rumble! I hate raspy, cackly exhaust systems that "flutter" when you decelerate.

Stingers, baby!

Old 12-30-2011, 07:31 PM
  #3  
Vetteman Jack
Administrator

Support Corvetteforum!
 
Vetteman Jack's Avatar
 
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 343,963
Received 19,581 Likes on 14,127 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran


Default

Congrats - looks like the shop did a great job.
Old 12-30-2011, 08:46 PM
  #4  
guido7834
Melting Slicks
 
guido7834's Avatar
 
Member Since: Mar 2008
Location: SC
Posts: 2,218
Received 202 Likes on 126 Posts

Default

I love my Stingers!
Old 12-30-2011, 08:54 PM
  #5  
3318C5
Melting Slicks
Support Corvetteforum!
 
3318C5's Avatar
 
Member Since: Nov 2003
Location: Germantown, TN
Posts: 3,265
Received 5 Likes on 5 Posts

Default

Congrats; love mine!!!!

Get notified of new replies

To Borla Stinger installed on Z06 (Merry Christmas to me!)




Quick Reply: Borla Stinger installed on Z06 (Merry Christmas to me!)



All times are GMT -4. The time now is 09:06 AM.