Dash gauges not moving
Thread Starter
Drifting
Joined: Mar 2011
Posts: 1,823
Likes: 43
From: East Aurora NY
Dash gauges not moving
I searched for this and didn't find anything.
I was out part throttle tuning my car to clear up some LTFT's and my dash gauges stopped working, all of them. No movement, just a check gauges light. The HUD is out too, just displays --
Is there a fuse for the dash?
I was out part throttle tuning my car to clear up some LTFT's and my dash gauges stopped working, all of them. No movement, just a check gauges light. The HUD is out too, just displays --
Is there a fuse for the dash?
Tech Contributor
Joined: Dec 2003
Posts: 19,384
Likes: 87
From: Horncastle Lincolnshire, England
2023 C5 of the Year Finalist - Unmodified
A total loss sounds like blown fuses
Looks like #19 and #25 on the footwell panel for the IPC. The HUD is through the same fuses. Did you check both?
Looks like #19 and #25 on the footwell panel for the IPC. The HUD is through the same fuses. Did you check both?
Last edited by DeeGee; May 6, 2012 at 02:22 AM.
What sw do you use - EFILive or HPTuners? Thinking there was a momentary PCM glitch due to the OBDII hookup.
