When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Guys I just got these kooks 2 inch headers intalled on the car. Now will be putting ever thing back together. Put them in from the top had to remover everthing to get them in, even the booster from the firewall. But didnt have to cut nothing off the bell housing and the car has a QTime aftermarket one. Also didnt have to cut the air cond line but did have to remove and empty the line then refill and just push the line over a little.. Robert
Nice. Believe me your gunna love them.
Thats one hell of a task to install yourself.
congrats on getting the job done...
Not as simple as they told me for sure, four days after work about 3 to 4 hrs each night. But will have it back up and going by this friday for sure are hoping to any way.. Man there is no room down on each side now at all... Robert
Congrats on getting them in - sounds like quite the job.
It was the only way I would do this again is if doing a head and cam are had the motor out of the car. The vendor I got them from acted like no big deal just left one side of the motor up unhook that side of it and drop them in. NOT
Originally Posted by peter pan
Congrats Robert and I hope you put in new plugs at the same time
No just put in a new set not even 2 months ago when I pulled them out to do this job from pulling are cutting the cats out a few months befor this the car seems to be running a little leaner and the plug look great all 8 of them.... Robert