Toque....
Thread Starter
Melting Slicks
Joined: Mar 2007
Posts: 3,432
Likes: 74
From: KcMo.
2018 C5 of Year Winner
Toque....
Yesterday i changed my oil, spark plugs and wires.... Then took on the tranny fluid, rear diff fluid and anti-venom mod. All made easy thanks to your super helpful posts. Just wanted to say thanks for being one of those always there with whatever they can share forum members.
She is all buttoned back up and I can get down on some football watching today.. I have to say I love the anti-venom mod and having my ripper shifter for 3 years now I felt a bit goofy adjusting on my first drive after installing the copper washer... I slipped out of 2nd and third on separate occasions within the first 5 minutes of not so stiff driving... Was a little nervous then realized I was just adjusting myself.... All is well! I opted for just one washer. Now I just need to find and order the little boot that goes over the top of the shifter base... Kinda noisy coming through my shifter plate since it's and open hole there.... Anyone know if you can buy one separate?!
Toque, I know this is the wrong color silver Z for you and she is a bit too busy for you as well but thanks for helping me keep her fresh and road worthy
She is all buttoned back up and I can get down on some football watching today.. I have to say I love the anti-venom mod and having my ripper shifter for 3 years now I felt a bit goofy adjusting on my first drive after installing the copper washer... I slipped out of 2nd and third on separate occasions within the first 5 minutes of not so stiff driving... Was a little nervous then realized I was just adjusting myself.... All is well! I opted for just one washer. Now I just need to find and order the little boot that goes over the top of the shifter base... Kinda noisy coming through my shifter plate since it's and open hole there.... Anyone know if you can buy one separate?!
Toque, I know this is the wrong color silver Z for you and she is a bit too busy for you as well but thanks for helping me keep her fresh and road worthy
Le Mans Master
Joined: Jul 2007
Posts: 6,094
Likes: 3,468
From: Oswego IL
I have to agree 100%. I have Toque's write-ups bookmarked, and refer to them often. Shifting my B&M Ripper was always like arm-wrestling Brock Lesnar in every gear. Engaging reverse was about as easy as engaging a Victoria's Secret model. A small washer and some Amsoil later, I am shifting smoother and quicker than ever. Toque does the forum good! 
I have Toque's write-ups bookmarked, and refer to them often. Shifting my B&M Ripper was always like arm-wrestling Brock Lesnar in every gear. Engaging reverse was about as easy as engaging a Victoria's Secret model. A small washer and some Amsoil later, I am shifting smoother and quicker than ever. Toque does the forum good!
Race Director
Joined: Jul 2008
Posts: 17,767
Likes: 3,694
From: The Sunshine State
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
C7 of the Year - Modified Finalist 2021
Finalist 2020 C7 of the Year -- Modified
2020 C5 of the Year Finalist - Modified
C5 of Year Finalist (appearance mods) 2019
2018 C5 of Year Finalist
I also worked with Toque when purchasing my new CCW wheels and new tires. I compared offsets and correct wheel sizing, etc.
The first weekend I drove the car with the new wheels and with less than 100 miles on them, I experienced a small curb rash on my passenger rear wheel. (A little event that I'm still pissed off over thanks to some misguided car show parking instructions).
Anyway, less than 24 hours after the "accident", the rim was completely repaired back to a brilliant shine thanks to his sanding/polishing directions.
The first weekend I drove the car with the new wheels and with less than 100 miles on them, I experienced a small curb rash on my passenger rear wheel. (A little event that I'm still pissed off over thanks to some misguided car show parking instructions).
Anyway, less than 24 hours after the "accident", the rim was completely repaired back to a brilliant shine thanks to his sanding/polishing directions.
Thread Starter
Melting Slicks
Joined: Mar 2007
Posts: 3,432
Likes: 74
From: KcMo.
2018 C5 of Year Winner
I have to agree 100%. I have Toque's write-ups bookmarked, and refer to them often. Shifting my B&M Ripper was always like arm-wrestling Brock Lesnar in every gear. Engaging reverse was about as easy as engaging a Victoria's Secret model. A small washer and some Amsoil later, I am shifting smoother and quicker than ever. Toque does the forum good!
I have Toque's write-ups bookmarked, and refer to them often. Shifting my B&M Ripper was always like arm-wrestling Brock Lesnar in every gear. Engaging reverse was about as easy as engaging a Victoria's Secret model. A small washer and some Amsoil later, I am shifting smoother and quicker than ever. Toque does the forum good! I also worked with Toque when purchasing my new CCW wheels and new tires. I compared offsets and correct wheel sizing, etc.
The first weekend I drove the car with the new wheels and with less than 100 miles on them, I experienced a small curb rash on my passenger rear wheel. (A little event that I'm still pissed off over thanks to some misguided car show parking instructions).
Anyway, less than 24 hours after the "accident", the rim was completely repaired back to a brilliant shine thanks to his sanding/polishing directions.
The first weekend I drove the car with the new wheels and with less than 100 miles on them, I experienced a small curb rash on my passenger rear wheel. (A little event that I'm still pissed off over thanks to some misguided car show parking instructions).
Anyway, less than 24 hours after the "accident", the rim was completely repaired back to a brilliant shine thanks to his sanding/polishing directions.
Administrator
Joined: Mar 2001
Posts: 368,297
Likes: 24,776
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Car looks great Taryn, and I too have saved a lot of the DIY posts by Toque. He's a wealth of information.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
His wisdom has helped me immensely. HUGE thank you!!
Team Owner
Joined: Jan 2007
Posts: 29,063
Likes: 1,839
From: cookeville tennessee
Intermediate
Joined: Feb 2009
Posts: 28
Likes: 0
From: Spring Branch Texas
I have to agree 100%. I have Toque's write-ups bookmarked, and refer to them often. Shifting my B&M Ripper was always like arm-wrestling Brock Lesnar in every gear. Engaging reverse was about as easy as engaging a Victoria's Secret model. A small washer and some Amsoil later, I am shifting smoother and quicker than ever. Toque does the forum good!
I have Toque's write-ups bookmarked, and refer to them often. Shifting my B&M Ripper was always like arm-wrestling Brock Lesnar in every gear. Engaging reverse was about as easy as engaging a Victoria's Secret model. A small washer and some Amsoil later, I am shifting smoother and quicker than ever. Toque does the forum good! 
Pro
Joined: Sep 2009
Posts: 530
Likes: 68
From: old bridge nj
St. Jude Donor '10
Big fan of your car! Just always looks great. Love it
Yesterday i changed my oil, spark plugs and wires.... Then took on the tranny fluid, rear diff fluid and anti-venom mod. All made easy thanks to your super helpful posts. Just wanted to say thanks for being one of those always there with whatever they can share forum members.
She is all buttoned back up and I can get down on some football watching today.. I have to say I love the anti-venom mod and having my ripper shifter for 3 years now I felt a bit goofy adjusting on my first drive after installing the copper washer... I slipped out of 2nd and third on separate occasions within the first 5 minutes of not so stiff driving... Was a little nervous then realized I was just adjusting myself.... All is well! I opted for just one washer. Now I just need to find and order the little boot that goes over the top of the shifter base... Kinda noisy coming through my shifter plate since it's and open hole there.... Anyone know if you can buy one separate?!
Toque, I know this is the wrong color silver Z for you and she is a bit too busy for you as well but thanks for helping me keep her fresh and road worthy
She is all buttoned back up and I can get down on some football watching today.. I have to say I love the anti-venom mod and having my ripper shifter for 3 years now I felt a bit goofy adjusting on my first drive after installing the copper washer... I slipped out of 2nd and third on separate occasions within the first 5 minutes of not so stiff driving... Was a little nervous then realized I was just adjusting myself.... All is well! I opted for just one washer. Now I just need to find and order the little boot that goes over the top of the shifter base... Kinda noisy coming through my shifter plate since it's and open hole there.... Anyone know if you can buy one separate?!
Toque, I know this is the wrong color silver Z for you and she is a bit too busy for you as well but thanks for helping me keep her fresh and road worthy
Race Director
Joined: May 2012
Posts: 15,763
Likes: 3,281
From: Phoenix area, AZ
Tech Contributor
Joined: Jan 2004
Posts: 20,030
Likes: 289
From: Wylie TX --> Less is More, except under the hood !
Every vehicle in my driveway is Silver. I love everything he did above to his car. It looks mean as hell ! Toque
Thread Starter
Melting Slicks
Joined: Mar 2007
Posts: 3,432
Likes: 74
From: KcMo.
2018 C5 of Year Winner
That's an awesome compliment. Thanks so much! You might as well post up some pics of your vette so we can show you some love too... From the avatar I'm thinking you got a head turner
Thanks buddy I love the look of silver on vehicles too. Looks mechanical and sharp. Just can't shake it..
I love the look of silver on vehicles too. Looks mechanical and sharp. Just can't shake it..
Thread Starter
Melting Slicks
Joined: Mar 2007
Posts: 3,432
Likes: 74
From: KcMo.
2018 C5 of Year Winner
Figured you'd dig this oneIt's so funny because my wife saw all the GIF's I have saved recently and asked... "What is with all these, nerd?" I said... I am trying to keep up with a buddy on the forum.. He's got mad GIF's...
