Air dam question
Thread Starter
Pro
Joined: Jul 2011
Posts: 567
Likes: 17
From: Lodi Ca.
Air dam question
Does any one know what size the screws/bolts hold the left or right side air dams on and is there a built in nut or something. I know I could remove one of the others but I know someone here will know exactly what size I need and what I am talking about. Thanks in advance for the help
http://www.corvettemods.com/C5-Corve...LY_p_5528.html
http://www.corvettemods.com/C5-Corve...LY_p_5528.html
Racer
Joined: Oct 2012
Posts: 287
Likes: 2
From: Corydon Indiana
I reused the bolts that were already installed. If yours are still there, use them. The receiver area is self nutted. (Ouch! That sounds weird and quite painful!) Buy the metal reinforcements to stiffen the new air dams.
Regards,
Gunny John
Regards,
Gunny John
Race Director
Joined: Jul 2007
Posts: 18,681
Likes: 47
From: Reno is so close to Hell you can see Sparks , State Of Confusion
St. Jude Donor '12-'13-'14
Not sure what the threads are, But the heads are 7mm and they screw into U-Nuts. I have replaced mine 3 times, Just last week I took them off and am running without them.
Racer
Joined: Oct 2012
Posts: 287
Likes: 2
From: Corydon Indiana
I'm 68 and my knees are non-existant. Thank the lord I've got a small cherry picker. (For me, not the car.)Good luck,
Guns
