Need Help - Temperature Sensor Basel - UGH
Thread Starter
Instructor
Joined: Oct 2013
Posts: 163
Likes: 3
From: Soddy Daisy, TN
Need Help - Temperature Sensor Basel - UGH
So, I has not been a good day here.....
I "tied" to install the C5 Column lock bypass to no avail. I could not get yellow wiring harness to unplug no matter what I tried.
So giving up, I put everything back together and all is honky-dory UNTIL I try to reinstall the temperature sensor basel. Again, no matter what I tried, I cannot get it to snap back in. Is there a trick that I am missing. I really do not want to break the tabs off!
2 Questions:
1. Can someone provide some assistance?
2. When I do break the tabs off, where should I go to get a new one?
Sincerely, Optimism is low!
I "tied" to install the C5 Column lock bypass to no avail. I could not get yellow wiring harness to unplug no matter what I tried.
So giving up, I put everything back together and all is honky-dory UNTIL I try to reinstall the temperature sensor basel. Again, no matter what I tried, I cannot get it to snap back in. Is there a trick that I am missing. I really do not want to break the tabs off!
2 Questions:
1. Can someone provide some assistance?
2. When I do break the tabs off, where should I go to get a new one?
Sincerely, Optimism is low!
Advanced
Joined: Mar 2001
Posts: 57
Likes: 0
From: Fort Smith AR
Try looking at the instructions at this site http://97vette.com/howto/columnlock/bypassinstall.html
I hope that this helps.
I hope that this helps.
