Does This Seem Right?
Thread Starter
Racer
Joined: Jul 2006
Posts: 444
Likes: 56
From: DeBary Florida
Does This Seem Right?
Just purchased a Monster Clutch level 2 and related hardware for my '04 vert. Checked with one area shop (Orlando Florida area) for a price on the Labor to Install.....they told me $1350.00!! 
I do have headers on it. Does that seem right? Anyone who recently has had a clutch installed please chime in with the cost of labor. Thanks in advance.
And a Merry Christmas to All!!!
I do have headers on it. Does that seem right? Anyone who recently has had a clutch installed please chime in with the cost of labor. Thanks in advance.And a Merry Christmas to All!!!
Safety Car
Joined: Apr 2011
Posts: 4,260
Likes: 429
From: Houston TX
Seems pretty high to me. When I had mine done $500 was a "good price" and $1k was about the norm. Nobody likes doing a C5 clutch so they might have said a high price because they simply don't want to do it. Perhaps you could ask someone in your regional forum for a suggestion on where to go in your area.
Instructor
Joined: Oct 2013
Posts: 164
Likes: 0
From: San Diego
1K is extremely high. The most someone should pay is around $600-$700
We usually charge $450-$550 labor. Price varies pending slave cylinder change/bleed or additional preventive maintenance. Takes us exactly a day to do. Owner usually drops off around 9am, goes to work, then comes when we pick up. Usually between 5-8pm pending prior scheduling.
A regular shop should take 1-3 days pending parts or some type of unknown delay. There is always what if's when working on previously touched vehicles.
Also Black O2 is correct about the over pricing on a job they might not want to do. Could be a way to just turn you away politely. If you agree then its worth the hassle on their end.
We usually charge $450-$550 labor. Price varies pending slave cylinder change/bleed or additional preventive maintenance. Takes us exactly a day to do. Owner usually drops off around 9am, goes to work, then comes when we pick up. Usually between 5-8pm pending prior scheduling.
A regular shop should take 1-3 days pending parts or some type of unknown delay. There is always what if's when working on previously touched vehicles.
Also Black O2 is correct about the over pricing on a job they might not want to do. Could be a way to just turn you away politely. If you agree then its worth the hassle on their end.
Last edited by 9KJoey; Dec 23, 2013 at 10:52 PM.
Melting Slicks
Joined: Nov 2011
Posts: 2,789
Likes: 3
From: Jacksonville FL
I'm doing clutch, flywheel, slave and remote bleeder at my local shop in Jax for $900. EFI Alchemy - top Corvette shop. Tell them Randy sent you. It's only about an hour drive from Debary.
Thread Starter
Racer
Joined: Jul 2006
Posts: 444
Likes: 56
From: DeBary Florida
Hey Guys,
Thanks for the replies/info...
Got an email back from Geoff at Next Level Performance this morning...looks like that's where I'll be going $950.00 - $1000.00 with the header removal and pilot bearing.
Thanks for the replies/info...
Got an email back from Geoff at Next Level Performance this morning...looks like that's where I'll be going $950.00 - $1000.00 with the header removal and pilot bearing.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
